eBay picture

[BillOhio]

Check out the writing on the side of the tire.
Same car, should the driveshaft be this crooked? Never noticed before

[BULLITT65]

I see the comments " bent wheel use on rear". For the drive shaft I think the reflection of the exhaust pipe on the shaft gives a perception that it is at more of an angle than factory, but upon closer inspection it looked ok i think.

[Mike S]

Looks like the rear is definitely skewed. Are the axle tube mounts sitting on the spring tits for centering?
 I am only use to seeing mono springs with metal tits so I assume multi's have them too.

Mike

[BillOhio]

Just noticed, first picture shows the shock bolt I have been asking about

[69Z28]

Just curious but does the multi-leaf's come with the emergency brake line holder? I always thought that was a mono-leaf part.

[Mike S]

I see the comments " bent wheel use on rear". For the drive shaft I think the reflection of the exhaust pipe on the shaft gives a perception that it is at more of an angle than factory, but upon closer inspection it looked ok i think.

  I think you are right about the reflection. I know from experience that it's damn near impossible to skew a rear on the springs providing the axle brackets are of the correct width.

Mike

[BillOhio]

There's a holder on multiple leafs also

[69Z28]

There's a holder on multiple leafs also

Damn....now I need to check if I have them. I had to find the plates when I first bought the car because I took of the slapper bars. Always learning something.

[69Z28]

I don't think those are what's on the multi's though are they? I'm thinking they are different then the mono. I can't find a pic with any like whats on that car in the pic.

[ZLP955]

If that is the same car I'm thinking of (ebay), the spare wheel in the trunk has taken a big hit too - the wheel rim is visibly bent. Just don't understand how people include pictures like this in a sales ad, but then again, are they unaware, or just (silently) disclosing issues?

[BillOhio]

I think the cars Burgandy, listed for 54,900. I had ricks catalog handy and it says the bracket is for both sides multi leaf and rh side mono

[68Zproject]

If you look down the tunnel you can see the driveline is straight.  Just bad photography.

[sixt9x33rs]

I don't think those are what's on the multi's though are they? I'm thinking they are different then the mono. I can't find a pic with any like whats on that car in the pic.

They are all the same. The factory e cable support has a "W" stamped on the end of them. I don't know if the repops have that same stamp. If you need a picture of it send me an email.

[69Z28]

I don't think those are what's on the multi's though are they? I'm thinking they are different then the mono. I can't find a pic with any like whats on that car in the pic.

They are all the same. The factory e cable support has a "W" stamped on the end of them. I don't know if the repops have that same stamp. If you need a picture of it send me an email.

Figured it out that they are the same, part number 3923533. Unfortunately mine are missing so I need to locate a set. Anybody have 2 extras?

[69pace]

Anybody have the link to the ebay ad?