Author Topic: Great work by a fellow member  (Read 6433 times)

janobyte

  • Hero Member
  • *****
  • Posts: 1531
  • Before it was called Day 2 !
    • View Profile
Great work by a fellow member
« on: November 12, 2013, 08:58:36 PM »
Follow up on DWCOOK ,plating. Had Darrell plate some brackets for me ,while he had it gave him the green light on tackling the horn relay. Appeared ok outside but corroded under the cap. He just sent me back the pics and I am more than pleased ! Even sent me a clip of it in operation---music to my ears. Should be getting everything back this weekend and excited to post. However may be easier if he just posts a link. Don't be modest ;)

Also have been in touch with Scott Owens of Palmetto Enterprise concerning Phosphate, great guy ,answered any questions ,and product on the way. Looking forward to getting to it ,of course got to finish some painting for my wife first !
68 Z/28  born with: 302, drive line, etc..

cook_dw

  • Hero Member
  • *****
  • Posts: 3981
    • View Profile
Re: Great work by a fellow member
« Reply #1 on: November 12, 2013, 10:01:32 PM »
Thanks for the kind words Steve..   ;D

Here is before pics.







After:





Horn Relay Before






After:  Reason for the gold was when I removed the cap there were signs of gold cad along the edge.  So I put it back the way I thought it was originally. May not be "correct" but I did what I thought was originally there..









I will be shipping everything out this coming Saturday (16th) due to my work schedule..  Sorry for the inconvenience...   :-[  

Mike S

  • Hero Member
  • *****
  • Posts: 2665
    • View Profile
Re: Great work by a fellow member
« Reply #2 on: November 12, 2013, 10:50:12 PM »

  Those look great. Question.....did you plate the two brake hose holders for any specific reasons?

Thanks,
Mike
67 04B LOS SS/RS L35 Hardtop - Original w/UOIT
67 05B NOR SS/RS L35 Convertible - Restored

cook_dw

  • Hero Member
  • *****
  • Posts: 3981
    • View Profile
Re: Great work by a fellow member
« Reply #3 on: November 12, 2013, 11:05:15 PM »
Yes because I was asked to plate them..  ;D

No Steve will have to post why he wanted them that way.  If I had to guess it was for the corrosion factor..   ???

janobyte

  • Hero Member
  • *****
  • Posts: 1531
  • Before it was called Day 2 !
    • View Profile
Re: Great work by a fellow member
« Reply #4 on: November 12, 2013, 11:26:27 PM »

  Those look great. Question.....did you plate the two brake hose holders for any specific reasons?

Thanks,
Mike
I've read either silver cad or black in finish , all in all really could not hurt to give him something to practice on. I really had no idea what was original in finish, they had long been coated over and have not been on the car over 20 years---converted to a single caliper ,now it's going back. Plus I think the cad finish will give a little detail in that area.
68 Z/28  born with: 302, drive line, etc..

Mike S

  • Hero Member
  • *****
  • Posts: 2665
    • View Profile
Re: Great work by a fellow member
« Reply #5 on: November 12, 2013, 11:31:30 PM »
 I thought they were dipped in black originally. But, it sure can't hurt to have it as an undercoat if it's decided to blacken them later.
How may seconds did you leave it in the dichromate bath?

Mike
67 04B LOS SS/RS L35 Hardtop - Original w/UOIT
67 05B NOR SS/RS L35 Convertible - Restored

cook_dw

  • Hero Member
  • *****
  • Posts: 3981
    • View Profile
Re: Great work by a fellow member
« Reply #6 on: November 13, 2013, 02:46:13 AM »
I thought they were dipped in black originally. But, it sure can't hurt to have it as an undercoat if it's decided to blacken them later.
How may seconds did you leave it in the dichromate bath?

Mike

It varies depending on the part. 

68camaroz28

  • Hero Member
  • *****
  • Posts: 2232
    • View Profile
Re: Great work by a fellow member
« Reply #7 on: November 13, 2013, 12:08:16 PM »

  Those look great. Question.....did you plate the two brake hose holders for any specific reasons?

Thanks,
Mike
I've read either silver cad or black in finish , all in all really could not hurt to give him something to practice on. I really had no idea what was original in finish, they had long been coated over and have not been on the car over 20 years---converted to a single caliper ,now it's going back. Plus I think the cad finish will give a little detail in that area.
I thought they were dipped in black originally. But, it sure can't hurt to have it as an undercoat if it's decided to blacken them later.
How may seconds did you leave it in the dichromate bath?

Mike
Parts look excellent!

  Those look great. Question.....did you plate the two brake hose holders for any specific reasons?

Thanks,
Mike
I've read either silver cad or black in finish , all in all really could not hurt to give him something to practice on. I really had no idea what was original in finish, they had long been coated over and have not been on the car over 20 years---converted to a single caliper ,now it's going back. Plus I think the cad finish will give a little detail in that area.
Parts look great so nice work Darrell. All of the clips I have observed on survivors including off our 68 restoration were phosphate but ??????
Chick
68 Z/28 NOR 01B Orig motor/trans/rear
69 Z/28 NOR 07A Orig Block & GM Cross-ram/carbs
69 L34 Rest. Nova Father/Son Car
69 L78 Surv Nova Purch 4/69 31K miles
67 L89 Corv Tribute
68 Corv 427/400 Orig motor
07 Corv Z06
R 68Z build- http://www.camaros.net/forums/showthread.php?t=182584