Author Topic: Re-upholstering '67 front seats  (Read 8268 times)

upscope757

  • Member
  • ***
  • Posts: 152
  • Almost there...
    • View Profile
Re-upholstering '67 front seats
« on: October 03, 2013, 10:51:47 PM »
Any thoughts/recommendations on whether I should tackle the re-upholstering of my deluxe seats considering the fact that I have never done it before? Is there a knack that only the pro's have or can a guy watch a youtube video and figure it out?

I have the new cushions and seat covers already. I also have the hooks and pliers needed.

A local guy, who is very reputable, told me that for him to do it, with me providing all materials, would run me $225 for the front seats.

Thoughts?
Thanks,
Matt
Matt: 1967 RS/SS - L48/Powerglide - Sierra Fawn/Beige Vinyl Top, Charleston, SC

69pace

  • Hero Member
  • *****
  • Posts: 536
    • View Profile
    • TeamCamaro - Moderator
Re: Re-upholstering '67 front seats
« Reply #1 on: October 03, 2013, 11:02:24 PM »
It is not hard but you MUST have an obsession for details to have a good end result.
Most folks are intimidated but if you take your time, make sure you are in a warm place so the covers are supple, and have a good pair of hog ring pliers, and a set that are at an angle you can do it with no issues. Just take your time. Study the originals as you tear them down, take lots of pictures for reference.
1969 Z-11 350/300 with 4 Speed
TeamCamaro - Moderator

upscope757

  • Member
  • ***
  • Posts: 152
  • Almost there...
    • View Profile
Re: Re-upholstering '67 front seats
« Reply #2 on: October 04, 2013, 09:37:40 AM »
Thank you very much! My wife says, "Just pay the guy!" (kinda cool actually to have that kind of support).

I also did find two 20+ minute videos on youtube by National Parts Depot where they do a pretty detailed job on a pair of '67 deluxe seats no less.

I think I am going to give it a shot.

Really appreciate the guidance.
Matt: 1967 RS/SS - L48/Powerglide - Sierra Fawn/Beige Vinyl Top, Charleston, SC

69Z28-RS

  • Hero Member
  • *****
  • Posts: 5778
  • owner since 4-Apr-1976
    • View Profile
Re: Re-upholstering '67 front seats
« Reply #3 on: October 04, 2013, 12:51:33 PM »
There is a big difference (mostly measured in self satisfaction) between:
1)   'that' is a good job and looks nice.....
and 2)   'that' is a good job and looks nice,  AND I DID IT... '..  :)
09C 69Z28-RS, 72 B 720 cowl console rosewood tint
69 Corvette, '60 Corvette, '72 Corvette
90 ZR1 red/red #246, 90 ZR1 white/gray #2466
72 El Camino, '55-'56-'57 Nomads, '55-'57 B/A Sedan

upscope757

  • Member
  • ***
  • Posts: 152
  • Almost there...
    • View Profile
Re: Re-upholstering '67 front seats
« Reply #4 on: October 04, 2013, 05:48:33 PM »
Hanging out with you guys is good for the soul... 8)
Matt: 1967 RS/SS - L48/Powerglide - Sierra Fawn/Beige Vinyl Top, Charleston, SC

69Z28-RS

  • Hero Member
  • *****
  • Posts: 5778
  • owner since 4-Apr-1976
    • View Profile
Re: Re-upholstering '67 front seats
« Reply #5 on: October 04, 2013, 06:14:55 PM »
Let your wife help you..  and both of you will get some satisfaction from a 'job well done'.  :)
09C 69Z28-RS, 72 B 720 cowl console rosewood tint
69 Corvette, '60 Corvette, '72 Corvette
90 ZR1 red/red #246, 90 ZR1 white/gray #2466
72 El Camino, '55-'56-'57 Nomads, '55-'57 B/A Sedan

upscope757

  • Member
  • ***
  • Posts: 152
  • Almost there...
    • View Profile
Re: Re-upholstering '67 front seats
« Reply #6 on: October 04, 2013, 06:20:56 PM »
You know... she is a professional seamstress... could probably use that skill set...
Matt: 1967 RS/SS - L48/Powerglide - Sierra Fawn/Beige Vinyl Top, Charleston, SC

LVN 67

  • Member
  • ***
  • Posts: 139
  • John 67 NOR 02E L-35/T400, 6th Owner
    • View Profile
Re: Re-upholstering '67 front seats
« Reply #7 on: October 04, 2013, 09:08:03 PM »
My wife did the complete interior on our 67. My help was to take everything out, to include headliner and carpet; and "go away" until it was done. I'm a get it done yesterday guy, and she said, "I'll do it."  She is very particular how things are done. Came out great and I always give her the credit for a fine job at every show or cruise we go to. I couldn't have done it without her.   ;D

JKZ27

  • Hero Member
  • *****
  • Posts: 559
    • View Profile
Re: Re-upholstering '67 front seats
« Reply #8 on: October 05, 2013, 04:57:23 PM »
I just did the interior in my 68 standard. I found that there are a lot of materials involved in doing an upholstery job. I had to get a roll of cotton, paper covered wire, cheese cloth, good burlap, jute, felt, synthetic batting, "s" springs, adhesive, etc. Also, have plenty of curse words on hand, you may use a lot of them. A 1lb box of hog rings was barely enough for me as I wasted a bunch of them trying to get them through all the layers of foam, cotton, and burlap. I guess my hands aren't strong enough. I also had to repair broken springs in both front seats and do some minor weld repairs on the seat backs where the sheet metal had torn a bit. I am very glad that I did the job myself but I don't know if I saved any money or have any wits left over. If you are only doing your front seats it will likely be a fun job but just be prepared to run into a few llittle snags along the way. I used Legendary seat covers and they are very nice but I had to add a lot of cotton and batting over the new foam to get them tight. Also, unlike the Youtube guys, I reassembled everything on my seats exactly as they came apart with the same type materials with the exception of the synthetic batting. I'll check and see if I have any useful pictures.

John
John
69 RS/SS Cortez Silver, L48 MC1
68 RS Ash/Ivy Gold 327EFI M20

upscope757

  • Member
  • ***
  • Posts: 152
  • Almost there...
    • View Profile
Re: Re-upholstering '67 front seats
« Reply #9 on: October 06, 2013, 11:29:20 AM »
More solid advice. The back seat seems to be a more challenging proposition. Where is a good local place to grab the hog rings and angled pliers? Is that something Lowe's would have?
Matt: 1967 RS/SS - L48/Powerglide - Sierra Fawn/Beige Vinyl Top, Charleston, SC

JKZ27

  • Hero Member
  • *****
  • Posts: 559
    • View Profile
Re: Re-upholstering '67 front seats
« Reply #10 on: October 07, 2013, 11:30:51 PM »
Its likley! I just saw hog rings and pliers on the Home Depot website.
I thought the back seats were much easier because they had fewer listings in the center of the seat and the springs were in better shape due to less use.
John
John
69 RS/SS Cortez Silver, L48 MC1
68 RS Ash/Ivy Gold 327EFI M20

169INDY

  • Hero Member
  • *****
  • Posts: 1777
    • View Profile
Re: Re-upholstering '67 front seats
« Reply #11 on: October 10, 2013, 04:03:50 AM »
The Key for me was I did it myself and they looked,,,,OK.
Two Critical ideas: Have a warm area as others have pointed out the materials are much easier to work with when supple (sp?) and pliable. You WILL need two sets of hands to do this. Others will claim they did all alone, but the job is a huge pain w/o 4 hands at the ready.
Go for it.

Jim
Jim
68 SS/RS L35 Th-400 LOS
69 Pace Car L48 Th-350 LOS
68 Z28 M21 LOS

plumL78

  • Member
  • ***
  • Posts: 222
    • View Profile
Re: Re-upholstering '67 front seats
« Reply #12 on: October 12, 2013, 09:16:25 PM »
I agree with the wife  Just pay someone who knows what they are doing and you do something else on the car that you know what to do