Author Topic: Did all 69Z28 cowl induction breathers have a flat bottom ?  (Read 16605 times)

Northernforce

  • Member
  • ***
  • Posts: 30
    • View Profile
Did all 69Z28 cowl induction breathers have a flat bottom ?
« on: September 12, 2013, 08:33:23 PM »
Did all the 69Z28 cars have the flat bottom cowl induction ait breathers ?I know the ridge bottom ones were service replacement-Just curious if they had  switched anytime -thanks for any input!
Dave

69pace

  • Hero Member
  • *****
  • Posts: 536
    • View Profile
    • TeamCamaro - Moderator
Re: Did all 69Z28 cowl induction breathers have a flat bottom ?
« Reply #1 on: September 12, 2013, 10:50:17 PM »
Dave - flat for Camaro production. 70 Chevelle had ridges and so do the reproductions. Here is a great thread over at TC to reference http://www.camaros.net/forums/showthread.php?t=54696

Brian
1969 Z-11 350/300 with 4 Speed
TeamCamaro - Moderator

Charley

  • Hero Member
  • *****
  • Posts: 707
    • View Profile
Re: Did all 69Z28 cowl induction breathers have a flat bottom ?
« Reply #2 on: September 12, 2013, 11:48:44 PM »
I think there are examples of late 69 Camaro's without the flat bottom.

69Z28

  • Hero Member
  • *****
  • Posts: 928
  • 69 X33D80 Z28
    • View Profile
Re: Did all 69Z28 cowl induction breathers have a flat bottom ?
« Reply #3 on: September 13, 2013, 12:05:03 AM »
I think there are examples of late 69 Camaro's without the flat bottom.


That was impression I got as well. I have all the GM parts for the ZL2 set up on my Z except the breather so my wife got me a repro from Ricks in 2001 for xmas and it has the ridge on the bottom. I thought I heard somewhere that the repro's where a copy of the late 69 model, but that info was from 12 years ago. I would like to get a flat bottom breather but they are hard to come by and very expensive from what I have seen.
GaryC

'UNRESTORED' 1969 Cortez Silver Z28 X33 D80

69Z28-RS

  • Hero Member
  • *****
  • Posts: 5778
  • owner since 4-Apr-1976
    • View Profile
Re: Did all 69Z28 cowl induction breathers have a flat bottom ?
« Reply #4 on: September 13, 2013, 01:09:24 AM »
Dave - flat for Camaro production. 70 Chevelle had ridges and so do the reproductions. Here is a great thread over at TC to reference http://www.camaros.net/forums/showthread.php?t=54696
Brian
There are recent reproductions that are 'advertised' as 'flat bottoms'..... although I haven't seen them..
09C 69Z28-RS, 72 B 720 cowl console rosewood tint
69 Corvette, '60 Corvette, '72 Corvette
90 ZR1 red/red #246, 90 ZR1 white/gray #2466
72 El Camino, '55-'56-'57 Nomads, '55-'57 B/A Sedan

69pace

  • Hero Member
  • *****
  • Posts: 536
    • View Profile
    • TeamCamaro - Moderator
Re: Did all 69Z28 cowl induction breathers have a flat bottom ?
« Reply #5 on: September 13, 2013, 02:31:21 AM »
There has always been unconfirmed speculation and theories by many that late August, September and November production end Camaro builds at Norwood were forced to adopt the Chevelle ridged bottom air cleaner base as the stocks of the Camaro flat bottom design were exhausted. Examples put forward as factory originals have not always survived testing and several have turned out to be Chevrolet service replacements which had the Chevelle ridge design after 1970 regardless of application and part numbers. Many "original" were added after factory as the ducted hood became widely popular as an aftermarket speed part and found its way onto 68, and 67 models. Several mid and late September 1969 Camaro builds still have flat bottoms. Anything is possible. We will never know for sure.
1969 Z-11 350/300 with 4 Speed
TeamCamaro - Moderator

z28z11

  • Hero Member
  • *****
  • Posts: 1853
    • View Profile
Re: Did all 69Z28 cowl induction breathers have a flat bottom ?
« Reply #6 on: September 13, 2013, 02:49:43 AM »
I think there are examples of late 69 Camaro's without the flat bottom.

I would like to get a flat bottom breather but they are hard to come by and very expensive from what I have seen.

Parts Place has them on sale now - part # CW10062Z, about $169.00 if I remember correctly. Even features the "notch" on the air snout, which (previously) was always a great way to tell the difference in repops and original ZL2's. My NOS 6485891 has the notch, but is a late production with the ridged bottom. I'll post a pic when I can dig it out -

Regards,
Steve
1968 Z28 M21/U17 BRG/W 1967 Chevy ll Nova SS 
1969 Z28 X77/M20/VE3 LeMans/W
1969 L78 X66/N66 Cortez/BVT
1969 Z11 L48/M35/C60/C06  1949 3100 5wd 235/6

Steve Shauger

  • Hero Member
  • *****
  • Posts: 633
    • View Profile
    • Vintage Certification
Re: Did all 69Z28 cowl induction breathers have a flat bottom ?
« Reply #7 on: September 13, 2013, 03:06:18 AM »
I have inspected and certified several survivor late build 69Z's Sept & Oct and they have had the ridged bottom. Again this is from first hand experience (not speculation), so based on what I have seen yes the ridged bottom was used/ introduced in late July-early Aug.

Gary (69Z28-RS), I'm curious if you Sept built Z has a ridged bottom, because mine does.
Steve Shauger
Vintage Certification™ Program, Providing Recognition And Status To Unrestored Vehicles.  The Supercar Registry-www.yenko.net-

69Z28-RS

  • Hero Member
  • *****
  • Posts: 5778
  • owner since 4-Apr-1976
    • View Profile
Re: Did all 69Z28 cowl induction breathers have a flat bottom ?
« Reply #8 on: September 13, 2013, 04:12:00 AM »
Steve,

mine has a flat bottom....  09C build.
09C 69Z28-RS, 72 B 720 cowl console rosewood tint
69 Corvette, '60 Corvette, '72 Corvette
90 ZR1 red/red #246, 90 ZR1 white/gray #2466
72 El Camino, '55-'56-'57 Nomads, '55-'57 B/A Sedan

BULLITT65

  • Hero Member
  • *****
  • Posts: 4476
    • View Profile
Re: Did all 69Z28 cowl induction breathers have a flat bottom ?
« Reply #9 on: September 13, 2013, 05:26:48 AM »
Can someone post a picture of what a flat bottom is and a example of a rigid please. ty
1969 garnet red Z/28 46k mile unrestored X77
-Looking for 3192477 (front) spiral shocks 3192851 (rear)
-Looking for an original LOF soft ray windshield
-Looking for original Delco side post negative battery cable part # 6297651AV

69Z28-RS

  • Hero Member
  • *****
  • Posts: 5778
  • owner since 4-Apr-1976
    • View Profile
Re: Did all 69Z28 cowl induction breathers have a flat bottom ?
« Reply #10 on: September 13, 2013, 01:44:49 PM »
Austin.. (just for you)..  :)

Attached below are a couple of photos of my original cowl air cleaner (09C car - sept '69).
-maybe someone else can post a photo of an original 'seamed' bottom' air cleaner??
(aren't todays digital cameras convenient???)  :)
09C 69Z28-RS, 72 B 720 cowl console rosewood tint
69 Corvette, '60 Corvette, '72 Corvette
90 ZR1 red/red #246, 90 ZR1 white/gray #2466
72 El Camino, '55-'56-'57 Nomads, '55-'57 B/A Sedan

z28z11

  • Hero Member
  • *****
  • Posts: 1853
    • View Profile
Re: Did all 69Z28 cowl induction breathers have a flat bottom ?
« Reply #11 on: September 13, 2013, 03:42:52 PM »
Ask and ye shall receive -

Note "4 spot" flame arrestor - was in the box when I bought it 25 years ago, at least - 

Regards,
Steve
1968 Z28 M21/U17 BRG/W 1967 Chevy ll Nova SS 
1969 Z28 X77/M20/VE3 LeMans/W
1969 L78 X66/N66 Cortez/BVT
1969 Z11 L48/M35/C60/C06  1949 3100 5wd 235/6

BULLITT65

  • Hero Member
  • *****
  • Posts: 4476
    • View Profile
Re: Did all 69Z28 cowl induction breathers have a flat bottom ?
« Reply #12 on: September 13, 2013, 04:01:22 PM »
so the second design had a rib in the bottom?
1969 garnet red Z/28 46k mile unrestored X77
-Looking for 3192477 (front) spiral shocks 3192851 (rear)
-Looking for an original LOF soft ray windshield
-Looking for original Delco side post negative battery cable part # 6297651AV

69Z28-RS

  • Hero Member
  • *****
  • Posts: 5778
  • owner since 4-Apr-1976
    • View Profile
Re: Did all 69Z28 cowl induction breathers have a flat bottom ?
« Reply #13 on: September 13, 2013, 05:18:03 PM »
Steve,

Can you take a photo of the full bottom from the bottom?  As a comparison to the flat bottom?
PS.  What did you mean by '4 spot' flame arrester?   first time I've heard that term....
09C 69Z28-RS, 72 B 720 cowl console rosewood tint
69 Corvette, '60 Corvette, '72 Corvette
90 ZR1 red/red #246, 90 ZR1 white/gray #2466
72 El Camino, '55-'56-'57 Nomads, '55-'57 B/A Sedan

z28z11

  • Hero Member
  • *****
  • Posts: 1853
    • View Profile
Re: Did all 69Z28 cowl induction breathers have a flat bottom ?
« Reply #14 on: September 14, 2013, 02:16:24 AM »
Steve,

Can you take a photo of the full bottom from the bottom?  As a comparison to the flat bottom?
PS.  What did you mean by '4 spot' flame arrester?   first time I've heard that term....

Gary,

   Be glad to get it back out tomorrow for another shot. "4 spot" refers to 4 dimples evident in the top of the flame arrestor screen - NOS and originals have them, repops don't, as many as I've ever seen. I'll get a better pic of that , too -

Regards,
Steve
1968 Z28 M21/U17 BRG/W 1967 Chevy ll Nova SS 
1969 Z28 X77/M20/VE3 LeMans/W
1969 L78 X66/N66 Cortez/BVT
1969 Z11 L48/M35/C60/C06  1949 3100 5wd 235/6