Author Topic: 1969 Z/28 original engine brackets and components  (Read 4021 times)

Bryan302

  • Member
  • ***
  • Posts: 179
    • View Profile
1969 Z/28 original engine brackets and components
« on: July 29, 2013, 05:18:23 AM »
I'm new to the CRG forum and have been soaking up all the restoration information that I can find.  I have a request for some of you 69 Z/28 owners.  PLEASE post some pictures of original plug wire stands, the skinny one on the RH side and the wider one on the LH side of the intake.  The brake hose bracket, that's beside the larger wire stand on the LH side.  I'm after the correct bend and shape and the proper markings or stamps that make them correct for a 69 Z/28.  From what I've read on the forum, my car, an 05A build date, would be too early for a fuel line bracket, Is this correct?  Is their any markings or stamps, codes, etc. that would identify an original 302 flat bottom cowl induction air cleaner?  I'm afraid my engine was a victum of the chrome monster, and that monster ate my original brackets, and air cleaner!!!  Thanks for any help!
Bryan S.
1968 RS Z/28, 12E, PNT R2, TR 749
1969 Z/28 X33, 05A, PNT 52 52, TR 719, endura bumper

JohnZ

  • CRG Member
  • *****
  • Posts: 4365
    • View Profile
Re: 1969 Z/28 original engine brackets and components
« Reply #1 on: July 29, 2013, 03:24:14 PM »
<< PLEASE post some pictures of original plug wire stands, the skinny one on the RH side and the wider one on the LH side of the intake.  The brake hose bracket, that's beside the larger wire stand on the LH side. >>

Photos below show the supports on my original 02D Norwood car. The fuel line bracket didn't appear until August.
'69 Z/28
Fathom Green
CRG

69Z28-RS

  • Hero Member
  • *****
  • Posts: 5778
  • owner since 4-Apr-1976
    • View Profile
Re: 1969 Z/28 original engine brackets and components
« Reply #2 on: July 29, 2013, 04:51:40 PM »
I'm new to the CRG forum and have been soaking up all the restoration information that I can find.  I have a request for some of you 69 Z/28 owners.  PLEASE post some pictures of original plug wire stands, the skinny one on the RH side and the wider one on the LH side of the intake.  The brake hose bracket, that's beside the larger wire stand on the LH side.  I'm after the correct bend and shape and the proper markings or stamps that make them correct for a 69 Z/28.  From what I've read on the forum, my car, an 05A build date, would be too early for a fuel line bracket, Is this correct?  Is their any markings or stamps, codes, etc. that would identify an original 302 flat bottom cowl induction air cleaner?  I'm afraid my engine was a victum of the chrome monster, and that monster ate my original brackets, and air cleaner!!!  Thanks for any help!

Hello Bryan
Welcome to CRG, and it's good to know you're getting back into the Camaro restoration game... :)
I'll look for you Saturday in Athens...
09C 69Z28-RS, 72 B 720 cowl console rosewood tint
69 Corvette, '60 Corvette, '72 Corvette
90 ZR1 red/red #246, 90 ZR1 white/gray #2466
72 El Camino, '55-'56-'57 Nomads, '55-'57 B/A Sedan

ban617

  • Member
  • ***
  • Posts: 222
    • View Profile
Re: 1969 Z/28 original engine brackets and components
« Reply #3 on: July 31, 2013, 02:46:36 AM »
 John , Your car is such a time capsule awesome....

 

anything