Author Topic: Removing "jet hot" from aluminum intake.  (Read 6220 times)

janobyte

  • Hero Member
  • *****
  • Posts: 1531
  • Before it was called Day 2 !
    • View Profile
Removing "jet hot" from aluminum intake.
« on: June 15, 2013, 05:37:21 PM »
20+ years ago the intake (one it was born with) off my 302 was coated by Jet Hot. No issues other than I want to go back to the natural finish. I have ran into a dead end as far as removal of the product. Want to get it out to CHP  but coating needs to come off per J.M. Jet Hot would rather leave their product on it, a company out of Texas ( runs 409's) offered to try blasting it ,no real guarantees. Need some input , thanks.
68 Z/28  born with: 302, drive line, etc..

68camaroz28

  • Hero Member
  • *****
  • Posts: 2228
    • View Profile
Re: Removing "jet hot" from aluminum intake.
« Reply #1 on: June 15, 2013, 11:28:48 PM »
What have you tried so far? I assume you tried glass beading? Did you contact the coating company to ask them? I would think it would take some type of abrasive, but how aggressive is the question???? Might want to think about obtaining a decent unmolested intake to give Jerry.
Chick
68 Z/28 NOR 01B Orig motor/trans/rear
69 Z/28 NOR 07A Orig Block & GM Cross-ram/carbs
69 L34 Rest. Nova Father/Son Car
69 L78 Surv Nova Purch 4/69 31K miles
67 L89 Corv Tribute
68 Corv 427/400 Orig motor
07 Corv Z06
R 68Z build- http://www.camaros.net/forums/showthread.php?t=182584

janobyte

  • Hero Member
  • *****
  • Posts: 1531
  • Before it was called Day 2 !
    • View Profile
Re: Removing "jet hot" from aluminum intake.
« Reply #2 on: June 16, 2013, 12:25:35 AM »
Done nothing so far except inquire, Jet Hot could do it but  lean towards recoating it . I spoke with a tech who worried about the integrity of the aluminum if they removed the ceramic and sent it back to me , however recoating it would be fine?  Spoke with somebody out of Lamar Walden's shop ( Georgia , I posted Texas earlier) a few weeks ago. They could blast it off but not sure how it would effect the overall finish/re skin. Now the intake is in great shape ,looks  good just not original. So this is my dilemma. 
68 Z/28  born with: 302, drive line, etc..

lakeholme

  • Hero Member
  • *****
  • Posts: 2497
  • 68-12D L30/M35
    • View Profile
Re: Removing "jet hot" from aluminum intake.
« Reply #3 on: June 16, 2013, 01:45:32 AM »
I asked the local Harley dealer. He says the Jet Hot tech is giving you the straight story.  Some H-D owners use it to get looks like black on black.
Phillip, HNR & NCR-AACA, Senior Master, Team Captain, Admin.,
Spring Southeastern Nationals chair, AACA National Director

MO

  • Hero Member
  • *****
  • Posts: 1125
    • View Profile
Re: Removing "jet hot" from aluminum intake.
« Reply #4 on: June 16, 2013, 02:50:58 AM »
It's possible that you may ruin the manifold trying to restore it. Try bead/media blasting it. If it doesn't work you will have to find another manifold to send to Jerry if you want to go back to original.

janobyte

  • Hero Member
  • *****
  • Posts: 1531
  • Before it was called Day 2 !
    • View Profile
Re: Removing "jet hot" from aluminum intake.
« Reply #5 on: June 16, 2013, 03:11:30 AM »
Want to compete in street stock ( day 2 ) and imagine I'd get gigged in points for the coating, reading over the score sheet for the Camaro nats and wondering how many. Shooting for next summer so plenty of time to make a decision.
68 Z/28  born with: 302, drive line, etc..

69Z28-RS

  • Hero Member
  • *****
  • Posts: 5778
  • owner since 4-Apr-1976
    • View Profile
Re: Removing "jet hot" from aluminum intake.
« Reply #6 on: June 16, 2013, 04:17:54 AM »
you'd probably best trade it to someone who wants the Jet Hot look.. trade for a decent stock one to 'recoat'....

09C 69Z28-RS, 72 B 720 cowl console rosewood tint
69 Corvette, '60 Corvette, '72 Corvette
90 ZR1 red/red #246, 90 ZR1 white/gray #2466
72 El Camino, '55-'56-'57 Nomads, '55-'57 B/A Sedan

zman1969

  • Member
  • ***
  • Posts: 153
    • View Profile
Re: Removing "jet hot" from aluminum intake.
« Reply #7 on: June 19, 2013, 03:27:28 PM »
It's possible that you may ruin the manifold trying to restore it. Try bead/media blasting it. If it doesn't work you will have to find another manifold to send to Jerry if you want to go back to original.
I agree try the beadblast first, if not I would source another manifold not having a non born with intake wouldnt kill you to me its more about block/heads ect plus date code cant be easily seen
Rich
69 RS/Z DZ302 Daytona bumble bee
69 T/A clone LS6/6sp
69 Nova SS 396

janobyte

  • Hero Member
  • *****
  • Posts: 1531
  • Before it was called Day 2 !
    • View Profile
Re: Removing "jet hot" from aluminum intake.
« Reply #8 on: June 19, 2013, 03:55:59 PM »
Yea , I'm starting to scan the ads, CHP has one done off a 69, something will surface.
68 Z/28  born with: 302, drive line, etc..