Author Topic: 69 Z 302 pulley finishes  (Read 4962 times)

zman1969

  • Member
  • ***
  • Posts: 127
    • View Profile
69 Z 302 pulley finishes
« on: May 16, 2013, 03:42:21 PM »
Hello I have been looking/searching here and Camaro.net and really havent seen what i was looking for. I looked at Jerrys book and its an early one, whats the correct finish on the pulleys is it 60% gloss paint? or Phosphate? if paint, what have Y'all been using? I'm about to put mine together and am trying to do this right the first time- just really seeing if any new info had came up
Rich

69 RS/Z DZ302 Daytona bumble bee
69 T/A clone LS6/6sp
69 Nova SS 396

Hans L

  • Member
  • ***
  • Posts: 144
    • View Profile
Re: 69 Z 302 pulley finishes
« Reply #1 on: May 16, 2013, 05:47:54 PM »
Jerry MacNeish rebuilt my engine and refinshed the pullies (water pump, crank, and smog).   60% Gloss Black is what he refinished them in. 






http://www.littooy.com/hans/
'69 Camaro RS Z/28 Van Nuys Built

69Z28freak

  • Member
  • ***
  • Posts: 363
    • View Profile
Re: 69 Z 302 pulley finishes
« Reply #2 on: May 17, 2013, 05:13:16 AM »
Hey Hans what paint did Jerry use on the engine block?
Mike 1969 Grandma Camaro

zman1969

  • Member
  • ***
  • Posts: 127
    • View Profile
Re: 69 Z 302 pulley finishes
« Reply #3 on: May 17, 2013, 12:34:29 PM »
OK what paint is everyone using for 60% gloss black? Hans thanks for the pics
Rich

69 RS/Z DZ302 Daytona bumble bee
69 T/A clone LS6/6sp
69 Nova SS 396

69Z28-RS

  • Hero Member
  • *****
  • Posts: 2987
  • owner since 4-Apr-1976
    • View Profile
Re: 69 Z 302 pulley finishes
« Reply #4 on: May 17, 2013, 01:28:49 PM »
weren't some smog pulleys 'phosphated'?   I think Jerry's book also says that...??   
Gary W / 09C 69Z28-RS, 72 B 720 cowl console rosewood tint
69 Corvette convertible, silver/black 350 hp,
60 Corvette white/red, 72 Corvette coupe, '70 Mach I 
90 ZR1 red/red #246, 90 ZR1 white/gray #2466
72 El Camino, '55-'56-'57 Nomads, '55-'57 B/A Sedan

Hans L

  • Member
  • ***
  • Posts: 144
    • View Profile
Re: 69 Z 302 pulley finishes
« Reply #5 on: May 27, 2013, 04:21:31 PM »
Hey Hans what paint did Jerry use on the engine block?

Sorry to the late response - just noticed your question Mike.   I actually asked Jerry some months ago what paint brand he uses - its:  Seymour EN-48 paint.


Hans
http://www.littooy.com/hans/
'69 Camaro RS Z/28 Van Nuys Built

69Z28freak

  • Member
  • ***
  • Posts: 363
    • View Profile
Re: 69 Z 302 pulley finishes
« Reply #6 on: May 28, 2013, 12:13:24 AM »
Hey Hans what paint did Jerry use on the engine block?

Sorry to the late response - just noticed your question Mike.   I actually asked Jerry some months ago what paint brand he uses - its:  Seymour EN-48 paint.


Hans

Thanks Hans. I am going to powder coat all of my black underhood parts. Using the same finish. Thanks for the product number. That is great information.
Mike 1969 Grandma Camaro

rszmjt

  • Member
  • ***
  • Posts: 143
    • View Profile
Re: 69 Z 302 pulley finishes
« Reply #7 on: May 28, 2013, 03:32:29 AM »
weren't some smog pulleys 'phosphated'?   I think Jerry's book also says that...??   


My 06A Z28 smog pulley is phosphated, its original

69Z28-RS

  • Hero Member
  • *****
  • Posts: 2987
  • owner since 4-Apr-1976
    • View Profile
Re: 69 Z 302 pulley finishes
« Reply #8 on: May 28, 2013, 04:29:13 AM »
weren't some smog pulleys 'phosphated'?   I think Jerry's book also says that...??   


My 06A Z28 smog pulley is phosphated, its original
Thanks.  :)   I'm unsure why they did them two ways (two suppliers)?  but I thought I'd seen a number of them phosphated (although all the other pulleys were painted).
Gary W / 09C 69Z28-RS, 72 B 720 cowl console rosewood tint
69 Corvette convertible, silver/black 350 hp,
60 Corvette white/red, 72 Corvette coupe, '70 Mach I 
90 ZR1 red/red #246, 90 ZR1 white/gray #2466
72 El Camino, '55-'56-'57 Nomads, '55-'57 B/A Sedan

Hans L

  • Member
  • ***
  • Posts: 144
    • View Profile
Re: 69 Z 302 pulley finishes
« Reply #9 on: May 28, 2013, 05:43:38 PM »
How about the power steering pulley?   I have yet to restore the pump and pulley.  The pulley appears to have been phosphate plated as well.   Compare the finish of the pulley to the pump in the last pic. 





http://www.littooy.com/hans/
'69 Camaro RS Z/28 Van Nuys Built

MyRed67

  • Hero Member
  • *****
  • Posts: 777
  • SZZLN 67
    • View Profile
Re: 69 Z 302 pulley finishes
« Reply #10 on: May 29, 2013, 03:32:27 AM »
Hey Hans what paint did Jerry use on the engine block?

Sorry to the late response - just noticed your question Mike.   I actually asked Jerry some months ago what paint brand he uses - its:  Seymour EN-48 paint.

Thanks Hans. I am going to powder coat all of my black underhood parts. Using the same finish. Thanks for the product number. That is great information.

69Z28freak>>>;
 SEYMOUR  EN48  is the Chevy Orange,  many say it is the most accurate color and sheen.   I used a Satin Black for all pulleys.
1967 Camaro  LOS  11A
Original Engine   Z - Tribute
Mike C.    NW - Illinois

Edgemontvillage

  • Member
  • ***
  • Posts: 157
    • View Profile
Re: 69 Z 302 pulley finishes
« Reply #11 on: May 29, 2013, 07:55:44 PM »
Here is a photo of an original '69 Z/28 Power Steering pulley I own. Although the original finish mimics phosphating its definitely paint. In the photo you can see a small area that is chipping on the bottom right side.
Lloyd
1969 RS Z/28 (Brooklyn Project)

Hans L

  • Member
  • ***
  • Posts: 144
    • View Profile
Re: 69 Z 302 pulley finishes
« Reply #12 on: May 30, 2013, 10:09:45 PM »
Edmontonvillage - Thanks and interesting.  I'll have to inspect the pulley better and determine if it's paint.   Must be a very light paint as it's not obvious like the other components.
http://www.littooy.com/hans/
'69 Camaro RS Z/28 Van Nuys Built

zman1969

  • Member
  • ***
  • Posts: 127
    • View Profile
Re: 69 Z 302 pulley finishes
« Reply #13 on: May 31, 2013, 12:50:00 PM »
OK if they were painted what paint will give the closest finish to original? the W/P pulley I have is pretty well just gloss now so I would like to install it once
Rich

69 RS/Z DZ302 Daytona bumble bee
69 T/A clone LS6/6sp
69 Nova SS 396

Edgemontvillage

  • Member
  • ***
  • Posts: 157
    • View Profile
Re: 69 Z 302 pulley finishes
« Reply #14 on: June 21, 2013, 04:30:31 PM »
Edmontonvillage - Thanks and interesting.  I'll have to inspect the pulley better and determine if it's paint.   Must be a very light paint as it's not obvious like the other components.

There is no indication it was dip painted (lacks tell tale runs) however its low gloss (at least 44 years later it is). I have not attempted to duplicate it.
Lloyd
1969 RS Z/28 (Brooklyn Project)