Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - L78racer

Pages: 1 2 [3] 4 5 6
31
Originality / Re: cooling fan and sticker mark on trunk deck
« on: November 05, 2017, 02:47:03 AM »
i need one of those fan blades if someone has one for a reasonable price. mine blew apart at the pure stock drags. '68 L78. i attached a pic but don't know if it will show up.


33
Originality / Re: 68 L78 Lifter Valley Splash Shield
« on: June 08, 2017, 01:24:13 AM »
i've used them under 163 intakes. where is the interference on the 069 intake?

34
General Discussion / Re: 67 oil pan removal
« on: January 01, 2017, 03:37:59 PM »
try turning the crankshaft. could be hitting front rods if at bottom of stroke.

35
General Discussion / Re: Cross member
« on: December 23, 2016, 08:18:25 PM »
IIRC the crossmember 'pad' where the trans mount sits is on an angle relative to the frame. it mimics the angle of the engine/trans ~5* nose up orientation. the upper steel skin has this area angle and cannot be seen unless you look at the crossmember out of the car. with the shift mounting holes on the driver side you have the correct angle for the trans mount.

one way to move the shifter to the left is to use a hurst spacer from another application but available separately. you will need longer mounting bolts.
http://www.ebay.com/itm/HURST-4-Speed-Shifter-Spacer-Plate-Comp-Plus-New-Process-Muncie-Camaro-1954319-/301565006727?hash=item4636acd387:g:EoEAAOSwll1WufiQ&vxp=mtr



36
1967 - Orphans / 7N211358 Muncie on CL
« on: December 05, 2016, 01:07:45 AM »

37
Originality / Re: Starter L78
« on: October 29, 2016, 08:59:25 PM »
Thank you.
Paul

38
Originality / Re: Starter L78
« on: October 29, 2016, 03:43:58 PM »
would a 8B9 be a good match for my LOS 02C L78? Thanks, Paul



39
General Discussion / Re: Just like the factory did it!
« on: September 30, 2016, 09:45:33 PM »
thanks for sharing that.

40
General Discussion / Re: 67 Camaro Cruise Control keeps Accelerating
« on: August 16, 2016, 09:41:46 PM »
i worked in the dealer when these systems were offered on GM cars.
the problem you are describing came up from time to time.
we would remove the underhood regulator unit and send it out for repair.
i think the places that fixed the delco radios and GM speedometers were the guys who fixed them
but i'm not sure exactly where they went for repair.


41
General Discussion / Re: 1969 Muncie M21
« on: August 03, 2016, 02:13:39 PM »
brad penn


42
General Discussion / Re: 1969 Muncie M21
« on: August 03, 2016, 12:10:02 AM »
use GL-4 type gear lube.

43
Maintenance / Re: Noisy tranny/clutch????
« on: June 06, 2016, 02:23:05 PM »
also check for the clutch dust shield hitting crank or something in that area.

44
Originality / Re: Starter L78
« on: April 12, 2016, 01:15:57 PM »
Thank you. The search continues.

45
Originality / Re: Starter L78
« on: April 06, 2016, 06:37:53 PM »
It is dated 7L15.
Ok thanks Ed. I will keep looking. I'll hang on to this one in case I need parts for the next one.

Pages: 1 2 [3] 4 5 6