Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - alex68rs

Pages: 1 [2] 3
16
Foreign Camaros / Re: Caracas Windows
« on: August 10, 2010, 03:19:59 AM »
Hi
I took pictures of the logo, but it's kind of hard to see it so I took a little video of it. We can see better on this.
http://www.youtube.com/watch?v=Eq1ckTKQXn8
It is writtten(Top to bottom): Marca Norven, INVEAUTO(in the logo), T-199, Hecho En Venezuela.

Thanks
Alex

17
Foreign Camaros / Re: Caracas Windows
« on: August 07, 2010, 01:47:07 AM »
I have trouble with my  cam. I'll take photos as soon as it will be ok!

18
Foreign Camaros / Caracas Windows
« on: August 04, 2010, 09:06:41 PM »
Hi
We all know that Caracas Camaro had different windows, they were made locally. I took my back glass and I did  some research of the logo and numbers.
My research bring me there:   http://www.favenpa.org/english/Detalle_Empresa.asp?Id=64

They say they made for many car brand including GM. Is it possible that the windows were made there?
If yes, can they still make original camaro windows with the same logo?


thanks
Alex

19
Foreign Camaros / Re: Caracas Crossmember
« on: August 02, 2010, 09:54:05 PM »
Did you know a webpage where Non-Us plant Camaros owner can talk with each other and share info and photos on this. Do we have a page like this in this forum?  Kurt, you only know a handful of caracas Camaro.... I'm starting to believe you when you say this is very rare!!

20
Foreign Camaros / Re: Caracas Crossmember
« on: July 30, 2010, 12:54:32 AM »
So If I have the small hole it was automatic (powerglide). Do you know when 1968 Caracas camaro production stop for 69.
And How can I know the assembly date of my car.  I have date for all my part but this is not the assembly date. Do you know approximatly how many caracas camaro is in north america
thanks kurt

21
Restoration / Re: Change 69 to 68 front disc brakes
« on: July 30, 2010, 12:45:48 AM »
Check with your wheel also . It might not fit on certain wheel

22
Restoration / Re: Change 69 to 68 front disc brakes
« on: July 27, 2010, 11:51:39 PM »
Yes they are different! 69 has single piston and 68 is four piston caliper

23
Foreign Camaros / Caracas Crossmember
« on: July 13, 2010, 09:57:45 PM »
Hi
I just check my crossmember on my caracas '68 Camaro and compare it with those in the CRG article. It is a Camaro small block crossmember ( the crossmember who fit with th-350 and all manuals trans.) In the last CRG report: It's believed the cars with automatics also had AC and power windows

My car was equipped with AC and PW back in '68 . Now My car as a Th-350 as trans, and I don't know where it came from because the numbers are all gone! I know that Th350 came from the factory on camaro in late 68.
My Crossmember is the original because it is written on in the part # and Hecho in Venezuela.

How can I be sure witch trans was there when it came out of the factory. Manual or automatic(th-350 or th400)
thanks
alex

24
Foreign Camaros / Re: '68 RS console For Caracas Camaro
« on: June 29, 2010, 12:15:31 AM »
Am I the first one you see with that kind of console?
Did the Console was done localy like glass batteries and other?
Thanks

25
Foreign Camaros / '68 RS console For Caracas Camaro
« on: June 15, 2010, 01:16:10 AM »
Hi CRG members
My Caracas Camaro console have three hole in the driver side of it. I don't think  that someone cut these hole to put some accessories there because they are pretty well done. I think it is original, but not sure at 100%. Did someone have info on this. There's a close shot of my console.

Thanks
Alex

1968 Camaro RS
AC-Power windows, Red on red car

26
Decoding/Numbers / Re: 68 Venezuelan Camaro
« on: April 29, 2010, 10:06:47 PM »
Hi
does somebody know something about that console, it is on my '68 Caracas camaro. why it have a little square and two hole. it is on the left side on the console
thanks

27
Foreign Camaros / Re: Camaros from foreign (non-US) assembly plants
« on: March 30, 2010, 04:15:49 PM »
Hi kurt
thanks for AC infos. For my paint code (697-123), you told me that you saw another car the same code style, do you remember is name, I'd like to talk to him.
Do Venezuela plant used laquer paint?
thanks

28
Foreign Camaros / Re: Camaros from foreign (non-US) assembly plants
« on: March 29, 2010, 08:22:12 PM »
Do you have a picture of what compressor was used on 68 camaro from venezuela

29
Foreign Camaros / Re: Camaros from foreign (non-US) assembly plants
« on: March 28, 2010, 08:43:25 PM »
AC Compressor

30
Foreign Camaros / Re: Camaros from foreign (non-US) assembly plants
« on: March 28, 2010, 08:23:28 PM »
Hi kurt
My car had, when I bought it in 2008, AC and power windows. I don't think that my Th-350 is original the code is almost gone, and I don't even know if Caracas Camaro use TH-350. I check out my AC compressor, no code, no label, how I can be sure that is original?
thanks
 Alex

1968Camaro RS
#12437HC108713
Paint#697-123
Tr# 724

Pages: 1 [2] 3