1
General Discussion / Last known 69 camaro build date?
« on: November 23, 2021, 11:51:20 PM »
Just curious,maybe Nov 1970? I know it on site here cant find it,
News:
Welcome to the CRG Discussion Forum!
Classified ads are not allowed on the forum.
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
2
Mild Modifications / Brake & fuel lines
« on: December 27, 2016, 04:02:15 PM »
My 69 L-35 Camaro has a 1/4 return & 3/8 OD fuel lines,they are original.I thought only the L-78 engine got a single 3/8 OD line & my car should have 5/16 OD & 1/4 OD ?? I have a 69 chevelle "being restored" that has the same lines. They are one continuous line, tank to fuel pump.I would like to set a junction block " no rubber hose" somewhere along the frame.does anyone make one? I also want to Eliminate the dist. block "brake lines front disc rear drum" on the frame rail & use a combo valve just below the master cylinder.Can that be done?? I want to set a junction block for the brake line too, as it is also one continuous line.
Thanks for any help!~
Thanks for any help!~
3
General Discussion / Cocktail shakers
« on: May 12, 2016, 02:38:03 AM »
On Convertible 67-69 camaros,were just 2 cocktail shakers utilized in the trunk,or were 4 used?Were
2 up in the front cowl area?? I have a friend who has come across a few convertible parts
for camaro,including hydrolic cylinders,shakers,brackets,convertible frame ect.PM me if interested!
Im not sure if I can post this subject matter here,I appologize if not.I thought I would give the guys here first crack at it.
2 up in the front cowl area?? I have a friend who has come across a few convertible parts
for camaro,including hydrolic cylinders,shakers,brackets,convertible frame ect.PM me if interested!
Im not sure if I can post this subject matter here,I appologize if not.I thought I would give the guys here first crack at it.
7
Restoration / 69 heater box
« on: November 14, 2015, 11:39:09 PM »
Is the 69 camaro" interior" heater box the same for a 69 chevelle?
8
Restoration / BB Radiator
« on: June 29, 2014, 06:34:49 PM »
I need to find someone who can "restore,rebuild "my 69 BB radiator.I have looked thru some old posts , but I cant seem to find any info.Radiator looks to be in good shape,but has been sitting around 40 yrs. There are no more radiator shops in Las Vegas.Any help is apreciated!
9
Restoration / welding on cast iron
« on: November 02, 2013, 01:13:43 AM »
I have an original 71 T/A and the right exhaust manifold has a small hair line crack in it.Someone has made an effort to weld it but it is not working.Anybody know someone who can fix it.I know its difficult to weld on cast iron.These are pretty neat looking manifolds,almost look like headers.Thanks
10
General Discussion / Buying & selling old camaros
« on: April 13, 2012, 12:04:52 AM »
A friend of mine bought a 69 camaro a few days ago"a retired man who buys & sells old chevys & parts.A few days ago he bought a 69 camaro,nothing really special, deluxe interior needed work ,seats ripped,dash warped badly ect.12 bolt"not posi"small block greasy,dity broken alt. bracket,painted 3 or 4 times ect.But it did run.The whole car in my mind was adverage at best.He paid 12,500.Sold for 15,500 And a guy wanted to give him 18,000 but he had already promised it to someone. love 69 camaros but are these cars in that "state" really worth that much$$?Maybe because Ive owned one for 36 yrs & I have mine,but I really dont understand this car to me was about 5000 all day long!
11
Maintenance / AC compressor
« on: July 06, 2011, 11:03:45 PM »
There seems to be oil leaking from the front of my AC compressor any ideas,what the problem is & how to fix it?? I dont know much about compressors,never worked on one.Thanks
12
General Discussion / Speedometer
« on: March 14, 2011, 11:46:33 PM »
What would be the difference in the speedometer reading going from a 307 to a 355 rear axle ratio??
13
General Discussion / Opinions please
« on: February 23, 2011, 11:32:09 PM »
I have a few original parts left over from my restoration- sub frame bushings front seat cover,trunk mat,leaf spring bushings,console gauge cover, exhaust pipes ,heator core, ect ect ect !! What do I do with these things?? Im not one to keep clutter around my house or garage,but they do have some value.I cant seem to just throw them out!Any ideas??
14
Maintenance / RS Headlamps trouble shooting
« on: October 30, 2010, 05:37:37 PM »
Im in the process of figuring out my headlamp doors,I think I know the problem. The headlamp switch seems fine I pull out the switch & vac is cut off at the orange hose.At the vac relay I have vac on the green nozzle with the switch" in the "normal" position.That will close the doors & keep them closed.When I push the switch to the open position I still have vac on the green nozzle & no vac on the red nozzle.That tells me the vac relay is bad. Correct? Also if I put vac on the green hose from the vac relay"by passing vac resovoir & vac relay" I still have vac on the red hose & vice versa.That tells me I have a leak in the actuators too.If I hold my thumb over the opposite hose im not vacuumizing & release my thumb the doors will move,not all the way but if I continue to do that they will open or close all the way.This sounds like I have a bad vacuum relay & bad actuators does this sound correct?
15
Maintenance / Glove box lock
« on: October 17, 2010, 04:57:42 PM »
I went to open my glove box on my Z10 the other day,& the outer lock assembly just spins. How do I open the box? I took the 3 screws off on the hinge ,thinking that might help me.I hate to pry it open.Any ideas??