Messages

16

General Discussion / Re: Suspension woes

« on: July 01, 2018, 04:45:08 AM »

Send me your address via my email spiwcio(at)gmail.com

It will be in the mail Monday.

17

General Discussion / Re: Suspension woes

« on: June 30, 2018, 10:49:37 PM »

I have an original I'll send you if your not looking for perfect.



Scott

18

General Discussion / Re: Harrison Radiator

« on: February 28, 2018, 10:58:52 PM »

I figured that he was talking about 69's. Did 67-8's come with curved necks? I didn't think so due to the AC mounting.

Scott

19

General Discussion / Re: Harrison Radiator

« on: February 28, 2018, 04:31:20 AM »

Curved necks were on Big block AC equipped cars as a heavy duty 4 core unit. the curved neck cleared the AC compressor mounted on that side of engine. Copo cars used the same radiator so the factory didn't have to build a different one just for copos

20

General Discussion / Re: Q? 12-bolt 3.07 rearend came with what engine/trans combo

« on: January 21, 2018, 11:20:35 PM »

Where does the speedo cable come out of the firewall? If it comes out under the fuse box area it is a lower performance model like a 307/200hp Higher performance model muncies, come out to the side of the throttle lever (Left side looking at the firewall, right side of the car)

21

Mild Modifications / Re: The Hugger goes ZL-1....

« on: December 23, 2017, 12:24:02 AM »

That looks amazing on the dyno. Video please!!!!!!!

Scott

22

Original Cars and Details / Re: 68 L78 Rallye Green

« on: December 17, 2017, 02:44:56 PM »

Just beautiful!

Scott

23

Decoding/Numbers / Re: 19W328256 Muncie

« on: November 16, 2017, 11:57:49 PM »

I thought that Willow run assembled Novas

Scott

24

Originality / Re: Correct 1969 Windshield washer repair kit

« on: October 28, 2017, 12:25:18 AM »

factory pumps are white. If you want a black one (service replacement) Anco still makes the whole assembly part number 61-02 for about 40 bucks.

Scott

25

Restoration / Re: 1969 Z28 spare wheel

« on: October 21, 2017, 06:19:06 PM »

Could the car been equipped with a doughnut tire and asked the dealership to install a full spare?

Scott

26

Originality / Re: 69 Z/28 Water Pump Pulley Real or Repro

« on: October 14, 2017, 01:32:08 AM »

the 4 inner protrusions were made from the spot welder that welded the inner cup to the pulley. If the spot welder is set deep you will not have the 4 dimples sticking up inside the cup. I have an original that only has 1 dimple. it is right at the weld.

Scott

27

Originality / Re: BB Heater Box vs. SB/6 Differences

« on: August 18, 2017, 10:07:27 PM »

Good info to know. Would you have measurements? I did not notice when I had mine out. Side by side would be noticeable.

Good job Bentley!

Scott

28

General Discussion / Re: New To Site 1969 Z28 Rally Sport Endura Bumper W/ Patina Solo Speed Shop

« on: August 14, 2017, 10:38:55 PM »

Amazing car! Love to see as many pics as you will post. I never get tired of the original cars that are virtually  untouched!

Scott

29

Garage Talk / Re: TEMPERATURE GAUGE WONT WORK!!

« on: July 08, 2017, 09:11:29 PM »

Did you wrap Teflon tape around the sender? That blocks the ground path from the sender. It was the first thing I would check. Also check the grounds to the dash. Seems like a very common issue.

Scott

30

Decoding/Numbers / Re: Engine Pad Stamp

« on: April 30, 2017, 11:34:17 PM »

"Darrell Cook
Just a couple old Camaros.

Do you have a 68 L78 Camaro?  If so, message me as I'd like to add it to my registry."

Sparky1.613, Darrell was not asking you a question about your camaro. That is a part of his "signature". There is a line separating his post and his signature.  It is an open question to all that read, it in hopes to find out more info about 68 L78's if someone knows about them

Scott