Topics

46

Decoding/Numbers / 1969 Trim Tag on ebay

« on: October 30, 2010, 05:14:45 PM »

Is this real? Looks newer than the rest of the car IMO.
http://cgi.ebay.com/ebaymotors/1969-Camaro-SS-396-/200537367954?pt=US_Cars_Trucks&hash=item2eb0f56592

Thanks CRG.
MIke

47

Originality / 69 z28 carb Nuts and washers

« on: July 09, 2010, 12:18:11 AM »

Was wondering how the carbs came from the factory. Studs Nuts & flat washers, or lock washers, or no washers. Any help will be appreciated.
Mike

48

General Discussion / 69 Burnished Brown z28 on home page

« on: May 22, 2010, 01:10:41 PM »

Great looking car in front of the last licks ice cream shop. This car looks like my X77 BB z28. When I get it done

49

Maintenance / Engine and trans install

« on: January 12, 2010, 12:55:55 AM »

I'm going to be installing the engine (SBC 302) and trans (M-21) in my 69 Camaro soon. The question I have is can this be done at one time? ( engine and trans together)

Thanks CRG

50

Maintenance / SBC oil pump bolt size

« on: December 14, 2009, 01:22:48 AM »

Just need to the size and length of the bolt that holds the oil pump on a small block. I know I have one but want to be sure I use the correct one.
Thanks
CRG

51

1969 - Orphans / 1969 DZ block on St Louis Craigs List

« on: August 29, 2009, 08:48:12 PM »

I dont know if someone has listed this or not. I just saw it on St Louis Craigs list. Oct 68 dated block.  I have not contacted the seller. I'm just throwing out there to all the CRG enthusiast. Please keep me updated.

http://stlouis.craigslist.org/pts/1318516581.html

Thanks CRG

Mike

52

General Discussion / Mecum Spring Classic @ Indy

« on: May 17, 2009, 03:25:14 PM »

I went to the Mecum Spring Classic at Indy yesterday. WOW , where else can you see so many Classic, Muscle cars, Hot Rods  and such for $10.00 entry fee. I thought it was great!

Mike

53

Restoration / 69 302 engine bearings . What kind?

« on: April 23, 2009, 11:50:12 PM »

I am in process of rebuilding my 302 and the Machinist recommended Clevite 77 HX . Just wondering what kind of bearings everyone is using? What do you recommend.

Thanks GRG

Mike

54

Decoding/Numbers / Muncie VIN decode

« on: April 21, 2009, 04:43:20 PM »

Can someone please decode this code on a Muncie 660 case I have. I belive it a Buick VIN. 40H116507



Thanks CRG

Mike

55

Originality / 69 Front Brake Line Clips

« on: April 04, 2009, 12:10:41 AM »

I was just comparing the finish on some clips that I got from a suppiler vs the originals I took off my car. The original on the right look more like a transparent blue to me . Does anyone know what finsh was used on the originals?

Thanks CGR




 

56

Originality / 69 Trunk Divider

« on: March 24, 2009, 01:33:25 AM »

OK , my 69 Z/28 came with a trunk divider that had no pad. The one I bought has pad and I've nearly destroyed it trying to put it in. It's like the seat hooks do not line up and were stamped wrong. I'm am pretty sure the black board part face's the trunk.  Can someone let me know how it should go?


Now I find that Heartbeat City sells the correct one without the pad that my X77 car came with.

Thanks CRG

Mike

57

Originality / 1969 Master cylinder

« on: January 07, 2009, 01:55:20 PM »

I have seen 69 cars with power disc brakes that have a master cylinder other than the "309" . My car had one like this in the picture. The car in the picture has been the original owner since 74. Is it possible some these were used at the factory. Was it common for this part to fail and have to be replaced so soon? Just wondering. 

Thanks CRG

Mike

58

1969 - Orphans / 69 COPO Engine - 9N6504XX

« on: December 28, 2008, 02:44:57 PM »

Here's an ad I found on Team Camaro. I dont know if it's been posted here or not or if it's legit.

Mike
http://www.camaros.net/classifieds/showproduct.php?product=31771

Description:  1969 L72 Camaro COPO 427/425 HP block. The casting number 3963512 with casting date of A.27.9. January 27th 1969. The Build date of the motor is 0318 MN. March 18 1969. MN is 1969 Camaro COPO 427 w/4-speed. This is a standard bore block with 4 bolt mains. This block has been baked, cleaned and pressure tested. I have the paperwork that was performed for this block. It has a light scratch on the #5 cylinder. All the cylinders are .0015 to .002 oversize except #5 which is .003. There is a VIN stamped on the block near the oil filter. It reads: 19N6504XX. The VIN of the '69 Camaro would be 124379N6504XX. It comes with the factory standard bore pistons (3906648) and 3/8 dimple rods.

6500.00 OBO 

59

General Discussion / DZ Block on Craigs List Memphis TN

« on: December 02, 2008, 02:42:44 PM »

There is an ad is on craigs list for a dz 302 618 block January casting date. No pictures or telephone number.
http://memphis.craigslist.org/cto/913073511.html
Thanks CRG

60

Restoration / 1969 Under hood fenderwell J nut

« on: November 24, 2008, 06:47:07 PM »

Just wondering which is correct. My car came with the one on the left. Original car guy's what do you have?



Thanks CRG Mike