Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - 1968RSZ28

Pages: 1 ... 409 410 [411] 412
6151
Originality / Re: 67 low fuel light?
« on: January 29, 2007, 09:36:32 PM »
Hi Ed -

   Beautiful photo! I'm curious, why is the fuel warning sender taped to the bottom of the gauge cluster housing instead of being mounted in the hole between the fuel and oil pressure gauges?  Mine is mounted in the hole. Just curious, that's all.

Paul  

6152
Originality / Re: Power steer pump cap
« on: January 29, 2007, 04:39:55 AM »
I just checked the P/S cap on my 02C built '68 Z/28. Here's what I have:
- metal cap (appears to have been originally painted black - most of this black paint is worn off).
- the words "USE AUTOMATIC TRANS FLUID TYPE A - CHECK OIL HOT".
- short (44 mm) black plastic tube (stick).
- "FULL" line on tube (stick) is 20 mm from the bottom of tube (stick).
- cap is vented on the top of the cap through the tube (stick).
- cap is a little loose on the P/S pump housing when it reaches the stops. OK it you back it off very slightly. worn gasket?
- I'm not 100% positive this is the original cap.
Hope this info helps.

Paul 

6153
Just picked up an original '68 Z28 distributor today from a local guy!  1111467, date is 8A3.  Will restore it to sell.  Also got the matching carb, 812 and 610 intake manifold.

Jerry
Hi Jerry -

   Would these parts be date correct for the engine pictured in my other post? If they are, what kind of "package deal" could you give me? Thanks in advance.

Paul 

6154
Originality / Re: 68 woodgrain ash tray+dlx hubcaps
« on: January 29, 2007, 03:53:43 AM »
http://cgi.ebay.com/ebaymotors/68-1968-CAMARO-RS-SS-Z28-WOODGRAIN-ASHTRAY-GM-OEM_W0QQcmdZViewItemQQcategoryZ34206QQihZ020QQitemZ300073984664QQrdZ1QQsspagenameZWDVWht

I thought I would alert anyone who might be looking for a nice original (GM) wood grain ashtray that there is one listed on eBay at this time at the above link. It appears to be in really nice condition. As of this post it was up to $127.50 with the reserve yet to be reached! No, I'm not the one selling it. Good luck!

Paul

6155
Check this out! Last weekend I called the previous owner of my '68 Z/28 to ask him about the wood grain ashtray in my car for another post on this forum. I also asked him about the distributor and water pump. He told me he has never had a distributor problem in any car that he has owned, but that he believes he has change the water pump in about every car he has owned. He also told me he thought he might have the "old part" out in the garage. I begged him to check and call me if he found it. I figured I wouldn't hear from him, so I marked my calendar to follow up with him in about two months. Well I was wrong, he called me last night I told me he found the water pump! I asked him how he knew it was from the Z/28. He told me because it was in a box he had marked "68 Camaro"  8). I headed over to his house first thing this morning to picked it up. I smiled  :) when I saw the orfice for the bybass hose. Casting number on it is 3859326 with a date code of K297! Does anybody have a recommendation on where I can get this restored/rebuilt? Thanks.

Paul  

6156
Decoding/Numbers / Re: Is this vin in the CRG database?
« on: January 27, 2007, 07:15:57 AM »
Hi Kurt -

   I just emailed you that file you requested. What do you think is the approximate build date of this vehicle based on the info in the CRG database? Also, what are my chances of finding this vehicle, assuming she's still around, based on your experience? Thanks in advance.

Paul

6157
Decoding/Numbers / Re: Is this vin in the CRG database?
« on: January 27, 2007, 04:51:07 AM »
Hi Mike -

   Thanks for getting the photos posted so quickly! How can I do this myself? Do I need some special software or what?

Paul

6158
Decoding/Numbers / Re: Is this vin in the CRG database?
« on: January 26, 2007, 08:32:52 PM »
Hi Mike -

   Thanks for offering to do this. The email has already been sent to you with four photos attached. Two of the photos are from the front and two are from the back after I pulled the right cylinder head. Please let me know what you think. Thanks again.

Paul

6159
Decoding/Numbers / Re: Is this vin in the CRG database?
« on: January 26, 2007, 06:34:36 PM »
Hi Kurt -

   Thanks for checking the database. I've tried several times to attach photos, but have been unsuccessful. The problem appears to be that there is a maximum file size of 128 KB per photo. The smallest photo file size I have is 1.48 MB. Do you have any idea how I can get around this?

Paul    

6160
Decoding/Numbers / Is this vin in the CRG database?
« on: January 25, 2007, 07:37:24 PM »
Hi Everyone -

   Is the vin 124378N391571 in the CRG database? Does anybody have or know of this vehicle? I have the original engine to this vehicle and would like to reunite it with it's chassis. Thanks in advance.

Paul

6161
Decoding/Numbers / Re: How do I title a Camaro without one?
« on: January 25, 2007, 07:15:59 PM »
Steve -

   Why not just go to your local police department and be honest. Tell them you are interested in buying this vehicle, but you think the car might be stolen. It is then in their best interest, not to mention their job, to check it out. And if it turns out to be stolen, you will be a hero for finding someone's baby! Good luck.

Paul

6162
Originality / Re: Spoiler AND Rear Antenna
« on: January 24, 2007, 07:51:27 AM »
69SS350 -

   Don't do it! Keep it stock. I've seen too many people butcher beautiful and original cars (my brother included) trying to obtain some "look". Keep it factory and you will keep it valuable. Just my two cents worth. Good luck to you.

Paul

6163
Test Drive / Re: How to find your old car
« on: January 24, 2007, 03:04:29 AM »
Hi Black Bart -

   You might want to start your search by sending an email to "KurtS" on this forum and ask him to check if your old car's vin is in the CRG database. If it is, he might have the current owner's contact information. And if he does, those documents and original parts are worth a fortune to the current owner. Of course if it were me, I'd try to buy her back! This all assumes the vehicle is still in existence. Good luck finding her!

Paul

6164
Originality / Re: 68 woodgrain ash tray+dlx hubcaps
« on: January 23, 2007, 09:56:06 PM »
cfar -

   How did you find out the owner history on your car? Thanks.

Paul

6165
Hi Everybody -

   I just wanted to say that I'm not at all interested in selling my 1111266 distributor. I have received several very generous offers by email, but thanks to the information provided by Jerry MacNeish and Randy's (aka dutch) almost identical example this is the factory original distributor for my Z/28. That said, I would be crazy to sell it. Good luck to all of you who are looking for one and thanks again for the offers.

Paul  

Pages: 1 ... 409 410 [411] 412
anything