Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - A Schab

Pages: [1]
1
General Discussion / Re: Distributor Cam Piece
« on: June 04, 2012, 10:08:01 PM »
I've also noticed ccw on the same part and have been told that means counter clock wise.Pontiacs have cw stamped on them and rotate opposite of Chevy's.Does anybody know anything more about theese stamp marks?

2
Originality / Re: 1969 z28 m22 transmission survey
« on: March 18, 2012, 09:44:41 AM »
Was the m-22 an option only for solid lifter motors? The reason that I ask is that there is  a 396/350 horse car here localy that the owner claims is a m-22 car and i think that i read in chevrolet by the numbers that it was  only for Z/28 and L78 cars.

3
General Discussion / Re: 7 Blade Temp Control Fan
« on: March 28, 2011, 09:41:04 PM »
My car is 12a and has the 779 blade on it,the car was built in LA

4
General Discussion / Re: AD Rims
« on: March 02, 2011, 01:42:35 AM »
Don't forget that the YH wheels also show up on MonteCarlo's,I have a Sept. 69 SS454 that has a complete set of YH's on it.

5
General Discussion / Re: 69 camaro LH door
« on: February 25, 2011, 10:40:16 PM »
My 69 R/A IV Trans Am is an 08 E and has the vin sticker on the door.

6
General Discussion / Re: White paint on 68 cowl tag
« on: February 04, 2011, 06:57:37 AM »
I looked at the rear end and found the following,casting# 3894860 NF,date I 15 7,stamping BS 09 18 G2 E.The tach is faded and it looks like there was a sticker on the top that has fallen off,the printed circuit has an ink stamp on it that does'nt look like a date to me.I don't see anything that makes me think that the tach has been changed,I wish the printed circuit had a date that could prove something to me,if someone else knows how to read it I'll post the info later for them.The gauge housing matches the rest of the interior for color and patina and the harness is a factory one not a conversion one.Is there anything else to look for?So back to the original question,does anyone know why the white paint was on the firewall ?

7
General Discussion / Re: White paint on 68 cowl tag
« on: February 04, 2011, 02:27:30 AM »
More info on the car,09C build date,PNT A2,Tr 719,BDY 68-12467NOR11365,VIN 124678N311787.The car is in bad but saveable condition,has P/S,P/T,P/W,gauges,tilt,correctly dated 4 bolt 323 block 069 intake,and high red line tach.Missing heads carb,pulleys,ect.I know that it looks like it could be an L 78 but who knows?It's been off the road and taken apart for 20+ years.I don't know what the white paint is about,I've heard about it on 67's before but have never been told why it was done,I have mainly owned 69's in the past so I know very little about 67 and 68 cars but would like to learn more about them.Thank you,Andy.

8
General Discussion / White paint on 68 cowl tag
« on: February 03, 2011, 09:28:38 AM »
Can anyone tell me why the cowl tag and surrounding firewall area on my 1968 is painted white? it looks like it was built like this,not painted later.It is a Sept.built black convertible SS if it matters.

9
Restoration / Re: Wire harness clip
« on: July 20, 2008, 09:43:09 AM »
The same clip is used on 67 to 72 pickup's to hold the rear body harness to the frame under the box.

10
Research Topics & Reports / Re: 69 decklid emblem holes
« on: April 21, 2008, 01:46:43 AM »
Kurt,I know that the accepted stripe layout stops under the spoiler but this cars stripes go to the edge of the decklid.The car got hit very hard in the mid 70's and has been off the road since.The car still has it's original Lemans blue on it.The stripes are the narrow 68 style with a notch in the right stripe for the C in the Camaro emblem.All of the spoiler mounting holes look like they were done at the factory and the tension rods are the correct size,and they have blue overspray on them.If you look at the bottom side of the decklid you can see that the paint on the lower set of emblem holes is not scratched from the emblem nuts so I feel that this rules out a stripe delete car that may have had the stripes added at a later date.

11
Research Topics & Reports / Re: 69 decklid emblem holes
« on: April 20, 2008, 04:45:57 AM »
I have a 10 A 68 LA Z/28 that is a factory spoiler car and it has both sets of emblem holes,the stripes are the narrow 68 style and they go all the way to the edge of the decklid,witch is still original paint.

12
General Discussion / Re: first Los 69 Camaro?? Vin??
« on: October 18, 2007, 11:38:25 PM »
I have whats left of L503081,it is a 10A RS Z/28

13
Originality / Re: 1" sway bars on 69 Z/28's
« on: June 01, 2007, 06:52:10 AM »
All 1969 Trans Am's had 1'' bars.

14
Decoding/Numbers / Re: 12A 69 Z28
« on: April 03, 2007, 01:26:34 AM »
I also have a 12 a 69 z/28 and would like to compare part dates but my car is from the LA plant.Andy.

15
General Discussion / Re: 69 Wheel well mouldings discontinued
« on: February 11, 2007, 07:25:00 PM »
I saw an new repo set made by goodmark this weekend,they looked a lot better than the corvex junk.The rears even had the notches in them like OE,the vendor said he had test fit them and was very happy with them.Andy.

Pages: [1]
anything