Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - Jon Mello

Pages: 1 ... 265 266 [267] 268 269 ... 295
3991
Chad, the Mark Donohue Performance Products items are neat. Do you happen to have a catalog and know what sort of things were offered?

3992
Daytona, February 1968.
L-R: Roger Penske, Mark Donohue, Bob Johnson, Craig Fisher. Standing: Jerry Kroninger, from Sun Oil.
Thank you to Pat Ryan for forwarding this to me so I could post it.


Jerry Kroninger Collection

3993
The dash in the car looks very similar in layout to the one seen below (from Pat Ryan's Penske Camaro). Some differences are...
1) yours should be painted black.
2) yours should not have the protruding light in the 10 o'clock position relative to the tach.
3) your tach should have single digits (read in thousands) rather than double-digits (read in hundreds).
4) the tach needle should be at rest around the 5 o'clock position rather than the 4 o'clock seen below.
5) there is just one switch on the left side, slightly lower than the top one seen below.
6) the stock switches should still be present in the dash
7) disregard the center dash area in the photo below. Your model is different than that.


Photo by Jon Mello

3994
Regarding the notch in the air cleaner housing, these two photos should give you a fair idea of what it needs to look like. I thought I had something better in my files but can't locate them as of yet.




3995
Ron Bucknum, driver of the #9 Penske Camaro for the 1969 season.


Frank Dihartce Collection


Frank Dihartce Collection


Frank Dihartce Collection

3996
Trans-Am Camaros / Re: Jones cable drive Tachometer
« on: June 07, 2011, 04:33:28 PM »
Mike, it was a real pleasure to meet you and your god son at the track over the weekend. I also had the pleasure of meeting Dale Mathers (kiwiboss) who flew in from New Zealand. In spite of the rain, I still had a great time. That's a nice score on the tach. Last week of school... lucky you!

3997
Trans-Am Camaros / Re: Engine photos
« on: June 07, 2011, 04:16:38 PM »
That's Ron Bucknum, driver of the #9 Penske Camaro. I think this is from the '69 Mid-Ohio Trans-Am race.


Frank Dihartce Collection

3998
Trans-Am Camaros / Re: Engine photos
« on: June 07, 2011, 03:51:52 PM »
Bruce,

That is the engine compartment of the first '67 Penske Camaro (the car that Mark drove through the first 8 races of the '67 season) but it is after the car went to Europe. I believe the photo may be from 1969. I received that photo from Jeff Barley in England. I'm not sure if you received it from the same source or if I may have forwarded it to you.

-Jon

3999
1967 Modesto Trans-Am bumper sticker.


Frank Dihartce Collection

4000
Mark Donohue's Camaro. This is believed to be at Mid-Ohio in June '69.


Frank Dihartce Collection

4001
A photo of the '69 Penske Camaro dash and interior. This is early in the '69 season due to the presence of the vinyl top.


Frank Dihartce Collection

4002
An social invitation given to Robert Barg for the weekend of the '71 Lime Rock Trans-Am race.


4003
From Robert Barg's collection...


4004
Trans-Am Camaros / Re: Front sway bars
« on: June 02, 2011, 10:09:35 PM »
Further information, the front sway bar diameter on this car is 7/8". To make the sway bar act like a thicker, stiffer bar you would move the end link forward (away from the end and toward where the sway bar crosses the frame).

4005
Trans-Am Camaros / Re: Stewart-Warner oil pressure sender
« on: June 02, 2011, 02:09:26 PM »
I had a recent conversation with Bill Howell who worked for Vince Piggins' group and was directly involved as the Chevy liason with Trans-Am from 1968-70. Part of our conversation touched on the subject of brakes and here is some of what he said...

"Penske ran 2 cars in the 68 Sebring, both with 2X4's. We won the Trans-am part of [the 1968 Sebring race] after getting tromped by the Fords at the 24 hr of Daytona.  We beat them mainly with a brake pad change trick I developed between Daytona and Sebring.  It took a year or more for Ford to figure out what it was.  It was a simple idea where we applied vacuum to the master cylinder to draw the disc brake pistons back into the calipers, releasing the pressure on the pads.  We took the vacuum off the brake booster.  We tapped off the brake booster thru a vacuum switch (same as used on the old Corvette headlight doors), controlled by a switch on the dash, then to the cover over the master cylinder.  [Coming into the pits] they did need to blip the motor to get vacuum into the booster.  Only the Penske cars were equipped this way, as I took the hardware with me when I went to Sebring before the race weekend to keep it secret. The system was mentioned in Van Valkenburg's book.  The reason it took Ford so long to figure it out was it was so simple, and most people thought that if you put a vacuum on the brake calipers, it would suck air past the seals and into the fluid."

Pages: 1 ... 265 266 [267] 268 269 ... 295
anything