1
Restoration / Re: Has anybody redone/restored a pitman arm?
« on: October 31, 2022, 06:29:07 PM »
ok my mistake - i was thinking idler arm....
News:
Welcome to the CRG Discussion Forum!
Classified ads are not allowed on the forum.
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
2
Restoration / Re: Has anybody redone/restored a pitman arm?
« on: October 29, 2022, 03:13:07 PM »
i thought edgemnont had one rebuilt? lloyd u out here?
3
Restoration / Re: 1969 Rally Sport Door Blackout
« on: October 21, 2022, 05:36:40 PM »
looks perfect!!
5
Restoration / Re: 1969 Rally Sport Door Blackout
« on: June 03, 2022, 12:13:05 AM »
I guess based on this - there was no silver paint applied to the tabs to blend in with the grill - as i previously that was reasonable - but not done. Agree, it looks like it was masked off somehow.
Good info
Good info
6
Restoration / Re: 1969 Rally Sport Door Blackout
« on: June 02, 2022, 02:34:59 PM »
good info guys!
7
Restoration / Re: 1969 Rally Sport Door Blackout
« on: June 01, 2022, 04:58:59 PM »
Interesting would be to see a 10-10 car as they had the silver grill - so that means the doors would have silver painted on the edges - reverse of what we see in the above pics.
I wish i can find pics of Richard Mayskum's 10-10 RS Z (i had pics) to see what his doors vs grill would look like.
I wish i can find pics of Richard Mayskum's 10-10 RS Z (i had pics) to see what his doors vs grill would look like.
8
Restoration / Re: 1969 Rally Sport Door Blackout
« on: May 31, 2022, 02:08:37 PM »
I have not looked , but is there anything in the assembly manual about applying the black out on certain color cars?
The above pic is how i remember one of the cars, the other "looked like" to be brush applied - but it has been a few years and no pics.
The above pic is how i remember one of the cars, the other "looked like" to be brush applied - but it has been a few years and no pics.
9
1969 - Orphans / Re: 19N670114 DZ
« on: September 30, 2019, 06:57:47 AM »
so what is the VIN? Hard to read the picture
10
General Discussion / Re: A little help valuing one of my ‘69s
« on: July 26, 2018, 02:49:33 PM »
IMO - looking at the pic - value wise to me assuming the rest of the drive train is original, trans and rear, id say
25K
25K
11
Restoration / Re: Had your moldings flash chromed?
« on: September 03, 2015, 05:37:51 AM »
Recently - depending on the type of restoration your doing - we send the molding out and have them chromed vs polishing. Price is about the same - the trim POPs nicely on the car - - long term it does not dull and they chrome process ensures a flawless finish on the moldings.
Just another way to do these if you choose.
Just another way to do these if you choose.
12
Restoration / Re: Jack - Ratcheting Assembly Removal
« on: September 03, 2015, 05:32:02 AM »
We separate (spread) the ratchet assembly mask slightly so it will slip past the notch on the shaft. Replate the shaft and paint the mask (ratchet assembly) - - insert replated shaft and insert into a vise (protect the paint) and slightly squeeze the ratchet assembly back to normal shape.
All done :-)
All done :-)
13
Restoration / Re: BrakeBoosters.com on the Velocity Channel!
« on: October 16, 2014, 12:43:50 AM »
great steve - thanks for your service as well - always nice work
14
Originality / Re: Correct finish on brake booster bracket-to-firewall nuts and lock washers?
« on: October 16, 2014, 12:41:28 AM »
I know this may cause controversy - but my late 69Z's both have gold iridite finish just like the booster on the nut and lock washer......
I have seem others phosphated as well......
I have seem others phosphated as well......
15
Originality / Re: Master cylinder cover
« on: September 10, 2014, 01:31:04 AM »
also - later 69 caps have the vent holes on the side......