Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - mark x22

Pages: 1 ... 5 6 [7] 8 9
91
Restoration / Re: Original tachometer
« on: November 27, 2009, 03:15:19 PM »
those are two different instrument panels . one original gauge the cutout for the tach is molded in, the clock looks punched . it looks to me they use the same mold but with a removable plug to do tach or fuel gage . that's why you can see an outline of the tach on fuel gage cars its just the plug .  if you do it in the car one of those templates is for that just get the right one , and look out for wires behind it ,and you wont need the brace if done in car .

92
Maintenance / Re: Blower Fan to Heater Core...
« on: November 25, 2009, 03:08:33 PM »
the far right position on the fan switch has an in line fuse under the hood  i think it comes off the relay on top of the AC box . it could also be the relay . get some  speedometer  lube for the cable . take a picture of the headlight door problem .

93
Restoration / Re: What is the correct finish on these fasteners please?
« on: November 25, 2009, 03:00:53 PM »
My clock screws are chrome , the speedo and tack are black . does the AIM show different numbers ?

94
Restoration / Re: Original tachometer
« on: November 25, 2009, 02:53:12 PM »
its held on buy three nuts . 









95
Originality / Re: Automatics with ZL2 ducted hood
« on: October 06, 2009, 02:11:29 AM »
I used a 2-barrel one and reshaped the bottom end .   


96
General Discussion / Re: Engine Mounting
« on: September 30, 2009, 02:06:56 AM »
Firewall to fan shroud 31 1/8" (you had 35.5") Maybe my shroud is thicker? (the new picture is 29.88 ).( 35.5 is firewall to screw .) does your shroud match mine on the 5.62 in the picture ?

check this new picture 8.5 front edge of valve cover to fan shroud .the 29.88 - 8.5 = 21.38 from firewall to front edge of valve cover .


97
General Discussion / Re: Engine Mounting
« on: September 28, 2009, 09:42:55 PM »
did it over  .

98
General Discussion / Re: Engine Mounting
« on: September 27, 2009, 02:36:49 PM »

99
Originality / Re: Auxiliary lighting group ZJ9
« on: September 12, 2009, 03:52:11 PM »
  The trunk light works any time the trunk lid opens . at least on the coupe

100
Maintenance / Re: 69 z28 dash, black and yellow wires
« on: September 08, 2009, 08:55:15 PM »
Should be the radio .

101
Restoration / Re: pointers for new hinges
« on: August 21, 2009, 08:44:26 PM »
If the door panels are off you can adjust the striker bolt from inside the door with the door closed through an access hole in the door latch .

102
Originality / Re: Rear Window Defogger Ground.
« on: June 16, 2009, 10:38:09 AM »


  you can print these full size

103
General Discussion / Re: 1969 steering column help
« on: June 15, 2009, 09:20:24 PM »
The arm on the column is welded to the tube.

104
Originality / Re: Rear Window Defogger Ground.
« on: June 15, 2009, 09:17:42 PM »
mine works okay . have you put in your switch yet ?

105
General Discussion / Re: oil line penetration
« on: May 29, 2009, 11:09:16 PM »
Ricks has them . part number RC-700 .   $14.99

Pages: 1 ... 5 6 [7] 8 9