Messages

76

General Discussion / Re: Pink wire?

« on: May 16, 2010, 12:44:23 AM »

http://www.camaros.net/forums/showthread.php?t=122300&highlight=anti+dieseling+solenoidhttp://www.camaros.net/forums/search.php?searchid=4878077

77

General Discussion / Re: Pink wire?

« on: May 13, 2010, 09:02:11 PM »

does it look like this in post 3 ?  http://www.camaros.net/forums/showthread.php?t=158997

78

General Discussion / Re: Pink wire?

« on: May 13, 2010, 02:09:11 AM »

Sounds like the fast idle solenoid . Does it reach the carburetor ?

79

General Discussion / Re: Rear defogger

« on: April 10, 2010, 01:45:04 PM »

Could it have anything to do with standard or deluxe interior and extra insulation with that option ?

80

General Discussion / Re: Rear defogger

« on: April 03, 2010, 06:33:14 PM »

This is what it should look like .

81

Restoration / Re: Oil line fitting

« on: March 27, 2010, 12:43:58 AM »

http://www.corvette-paragon.com/p-355146-oil-pressure-line.aspx call and ask

82

Restoration / Re: Oil line fitting

« on: March 24, 2010, 10:54:16 AM »

That should be 20 degrees not 40

83

Restoration / Re: Oil line fitting

« on: March 24, 2010, 09:50:55 AM »

The GM fitting is 40 degree  i have resharpened a drill bit  to reshape one . or try using a cone shaped rotary file  .

84

Originality / Re: oil pressure line

« on: February 26, 2010, 01:55:49 PM »

it has a dimple there about 4.5 inches from the wiper motor and 4.5 from the right wire gutter hole . the car is together and hard to measure.

85

Originality / Re: oil pressure line

« on: February 26, 2010, 12:20:10 AM »

look in UPC 0 A9 

86

Originality / Re: 68 Heat Stove Finish

« on: February 17, 2010, 09:44:10 PM »

The studs and stove are in UPC M35 A22 of the AIM ,

87

Decoding/Numbers / Re: J52 brakes - master cylinder date code vs. brake booster date code?

« on: January 01, 2010, 04:03:30 PM »

Thanks John

88

Decoding/Numbers / Re: J52 brakes - master cylinder date code vs. brake booster date code?

« on: December 31, 2009, 06:16:47 PM »

Thanks John , have any pictures it would be neat to see that set up ?

89

Decoding/Numbers / Re: J52 brakes - master cylinder date code vs. brake booster date code?

« on: December 30, 2009, 02:46:06 PM »

John was the complete front chassis assembly and rear end with springs and brake lines installed on  a fixture and filled with brake fluid before body drop ? If so how did they bleed the brakes ?

90

Maintenance / Re: M-21 lube leaking out of the speedo cable

« on: December 24, 2009, 05:18:55 PM »

Could the cable be damaged cutting the new seal ?