31
Originality / Re: BBC stock rockers arms with raised "L" on valve tip end
« on: January 29, 2010, 01:25:50 AM »
Ted,The "L" on a factory rocker stands for long slot.Jeff
News:
Welcome to the CRG Discussion Forum!
Classified ads are not allowed on the forum.
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
32
Decoding/Numbers / Re: Holley Date Code
« on: January 19, 2010, 04:06:34 AM »
8B1 is 1968 December 1st week. Early build 69 Z. Jeff
33
Restoration / Re: 68 4spd xmsn shifter
« on: September 26, 2009, 09:53:03 PM »
Change the tail housing(to a right side speedo),move the drive gear(don't forget) and go.No problem.Jeff
34
Originality / Re: Help with 302 MO block repair
« on: July 14, 2009, 01:52:26 AM »
Still would be important to know the VIN.
35
Restoration / Re: I dont have a rear brake pressure regulator
« on: January 19, 2009, 11:12:37 PM »
Most did not and it is fine.Jeff
36
Decoding/Numbers / Re: Engine number and VIN research 1968 SS/RS
« on: January 19, 2009, 11:11:38 PM »
Its most probably a mistake.Would not be the first.The # on the plate matches the #( exT0403MQ) on the VIN pad but the stamping on the Pad(ex 8L308048) is off by 1 car to the VIN on the plate(ex 8L308049) and the tag.If so it is a mistake. And no there is no way to research your problem.Jeff
37
Decoding/Numbers / Re: 69 codes
« on: January 18, 2009, 08:33:45 PM »
Do not forget that LA never used them at all.
38
Restoration / Re: 1969 Under hood fenderwell J nut
« on: November 25, 2008, 01:58:20 AM »
Left side correct.Jeff
39
Originality / Re: 69 Z28 leaf spring finish/Plastic pads
« on: May 26, 2008, 03:28:47 PM »
My 10 C 68 LA car has them. They are worn but there. Jeff
40
Originality / Re: 1967 BB transmission
« on: April 07, 2008, 02:44:16 AM »
Speedometer Hole in the firewall is where? If by the throttle it was a muncie. Otherwise t-400 Jeff
42
Originality / Re: Speedometer Gear Reduction Unit
« on: March 20, 2008, 03:31:50 AM »
#6476736 dated by #days and year.Like 102 8. I am not sure of the drive gear.But if you find two I need 1 also.Jeff
43
General Discussion / Re: Members from old forum version please post here
« on: October 25, 2005, 12:54:53 AM »
acelr8 both old and new thanks for a GREAT site