Topics

1

Mild Modifications / Wilwood disc brake upgrade help

« on: January 31, 2016, 02:53:36 AM »

 have 1967 camaro with factory disc brakes. I'm installing the wilwood dynalyte disc brake complete kit. I have to use factory spindle bracket and I believe that I must cut ears off and drill out holes but instructions are terrible and I don't want to cut unless 100% sure. Any help appreciated

2

General Discussion / Steering wheel

« on: November 29, 2015, 06:49:18 PM »

Wondering what a 67-68 walnut restored steering wheel would be worth?

3

Mild Modifications / Oil pan

« on: April 30, 2015, 12:38:43 PM »

I'm have a milidon 31555 oil pan that milidon recommend. Installed it in my 67 camaro and the inner tie rods hit. Any suggestions?

4

Restoration / Alternator bracket

« on: April 24, 2015, 12:59:29 AM »

Looking for a good alternator bracket for my 67 bbc.  Any suggestions?

5

Mild Modifications / Aluminum manual steering box

« on: January 13, 2015, 01:22:46 PM »

Looking to replace manual steering box to aluminum.  Does anyone know who sells and if it will mount up to my rAg joint and pitman arm?
Thank you in advance

6

Originality / Engine \ heads

« on: December 28, 2013, 07:49:14 PM »

Ihave a short block dated D136 (april 1966) 2855961 and one J46 (oct 1966?) 3902406. also heads j135, j145 (oct. 1965) 3872702 and  a set j111, c1872 (oct 1971 , march 1972).  how much do you think there worth?

7

Mild Modifications / Headers / tall block

« on: December 26, 2013, 09:56:40 PM »

Im looking to put a tall block 10.2 into my 67 camaro anyone have a suggestion on headders where to buy?

8

Restoration / fuel pump

« on: August 24, 2011, 11:59:45 PM »

I need my original ac delco fuel pump rebuilt any leads or contacts. thank you

9

Mild Modifications / 1967 lowering

« on: July 25, 2011, 06:26:59 PM »

MY 67 camaro has 3" lowering blocks. I dont like the lowering blocks an want to see about getting correct springs an keep this same height maybe 1" highter max. does anyone know if i can get a spring like this? would it be mono or multi?  I also want to see if  my springs in there now are worn or if they are lowering springs does anyone have a measurement for me or advice?

10

Originality / 890 horn relay

« on: July 14, 2011, 12:20:00 AM »

Does an 890 horn relay fit a 69 or 70 camaro? does anyone have one for sale

chris
716 990-9558

11

Originality / flywheel

« on: July 03, 2011, 12:22:19 PM »

I believe i need a flywheel # 3973456 or 8 (four speed)  for my 70z. would anyone know if this is correct or have one there looking to sell?

thanks chris
716 990-9558

12

Decoding/Numbers / date code help

« on: July 02, 2011, 12:20:02 PM »

I have a 67 camaro with an 11b which is secondd week of november would that be nov of 66 or 67? also it is a los built car an on the trim tag after los it has a 6082 is this a sequence number and should it somewhat match the last four of vin which is 6219?   thank you

13

Originality / 1967 ride heigth

« on: April 28, 2011, 06:49:18 PM »

Can anyone give me demensions of factory ride height and where to measure from? What diameter tire if this makes a differance

thanks

14

Mild Modifications / Frame connectors

« on: March 29, 2011, 12:01:37 AM »

Im putting frame connectors in my 67 camaro any recomendations of brand or type .   thanks

15

Originality / SS Camaro

« on: March 25, 2011, 01:45:44 PM »

When was the 1967 SS first built? What month was the 396 offered? Im getting different opinions on this subject.