Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Topics - Lane 68

Pages: [1]
1
Restoration / EARLY 1968 RS Grill Attaching Screws
« on: September 19, 2012, 10:55:37 PM »
If you have an EARLY 1968 RS Camaro..Build date of 9A..9B..9C..9D..10A..10B..10C..10D
and your Camaro is ORIGINAL..I would like to see pictures of the lower grill attaching screws and nuts that hold it to the lower valance. IT will help myself and others for restoration purposes.  The 68 AIM ist specific on these screws and nuts and it would be good for everyone if we knew what was used on an ORIGINAL car during these dates.
Thank you for your help.
Lane

2
Originality / Early 68' RS Grill Attaching Screws
« on: August 26, 2012, 05:28:19 PM »
My RS/SS is a 10B build.  In the AIM, Pg 424, Z22 / A4, it shows:
6 = Screw #9419303
8 = Nut #9422836
Does anyone have a picture or know what size srew and nut this was?
Early cars used screws and nuts across the bottom of the GRILLE-LOWER (7) to attach to the LOWER VALANCE PANEL
as pictured in the AIM. I believe the nut had a star washer attached too. I appreciate your help!
Regards,
Lane

3
Originality / 1968 SS with Deluxe Interior........ Hood Insulation
« on: August 15, 2012, 03:38:35 AM »
Would someone(s) with a 68' SS with DELUXE Interior (Z87).... send me picture(s) of their ORIGINAL hood insulation for reference.
Thanks again!
Lane68

4
Originality / 1968 Camaro Hood Insulation
« on: August 13, 2012, 02:52:34 AM »
Can someone help me with a "simple" answer to this question?
I have a 1968 Camaro, RS/SS, AC, 350 with RPO Z87.
Question.....Was the hood insulation "molded" with indentions for air cleaner, A/C, etc....OR was it "smooth" with no indentions.

Thank You!! ;D  ;D  ;D
Lane

5
Originality / 1968 Camaro Window Crank Knob Color
« on: July 19, 2012, 07:36:32 AM »
I have Black/White Houndstooth Deluxe interior in my 68 RS/SS Coupe.
Black dash / door panels / Woodgrain center dash panel with the 'deluxe' trim.
The window crank knobs are "clear".
Was this a correct option or should they be "black"?
Thank You!!....Lane 68

6
Restoration / 1968 Camaro Horn Relay Part Number
« on: August 17, 2011, 05:39:52 AM »
Need help on part number for a 1968 Camaro Horn Relay.
RS/SS ...350
Any help is appreciated.

Thanks,
Lane

7
Decoding/Numbers / 1968 12 bolt code
« on: July 12, 2009, 09:30:55 PM »
Hello,
My 68 rear passenger axle housing has a "BS 0 1 1 5 G 1" date stamp
Is the "01" mean January 15th?
Seems odd they would put an "0" in front of the "1" but probable. ??
Thank You for the help.
Lane

8
Restoration / Ignition Coil Condensor.......... attaching screw
« on: July 12, 2008, 02:26:27 PM »
What size and head marking was an original coil condensor attaching screw you use to attach the condensor to the coil bracket on a 68 Camaro?  Mine looks "bubba" >:(

9
Restoration / 68' RS/SS Camaro front spoiler
« on: July 07, 2008, 11:33:16 PM »
Is the front spoiler on a 68' RS/SS made of a "brittle" dark grey/black smooth plastic or a rubber/vinyl "flexible" material with a grain in it?  Pepro folks say "theirs" is correct depending on which one they carry.
If you know where to get the correct spoiler, please let me know.
Thanks!!
Lane

10
Restoration / 68 Camaro Multi Leaf
« on: July 04, 2008, 06:24:32 PM »
Can someone please send me some pics of your 5 leaf multi leaf set up.
I believe I have the wrong base spring plate.  Need to see a real base plate and shock attachment.

Much thanks, I am new here!!  :)

Lane

Pages: [1]