Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Topics - big iron

Pages: [1] 2 3 ... 5
1
Restoration / 67 Firewall Circuit Breaker C06 A1 #9
« on: September 11, 2022, 11:24:15 PM »
What size and finish are the screws #9 (3858195) for the firewall circuit breaker?
Bob

2
Originality / 67 L78 BB Oil Line Fittings ( With gauges)
« on: June 13, 2022, 10:15:53 PM »
Does anyone have pictures of original L78 oil line fittings, with gauges?
Bob

3
Originality / 67 T400 shifter to tunnel seal
« on: May 23, 2022, 03:05:56 AM »
67 AIM M40 A7 #1 shows same as M35 A8 #4 3895281 seal. 3895281 seal is for the PG shifter and can be used on T400 shifter but I do not think it is correct.
I am restoring an RPO M11 shifter and it uses a 3912612 seal (68 AIM M11 A3 #12) which is not as deep as the PG seal (2"vs 2 3/4"). The M11 shifter (M11 A3 #11 3912607) is the same shifter used in 67 (M40 A7 #2).
Could someone with a 67 T400 check to see if the PG seal (2 3/4") was used on the T400 shifter in 67?
Bob

4
Originality / 69 Bucket Seat Tops w/Steel Springs
« on: February 29, 2020, 12:27:27 AM »
How do you replace foam on 69 bucket seat tops w/ springs  or should I ask if it can be replaced ?
Have searched but haven't seen anything on this topic.
Bob

5
Originality / 67 68 Glove Box Liner
« on: July 06, 2019, 07:48:11 PM »
Did the 67/68 have only black flocked glove box liners?
Bob

6
Originality / 67 Lower A Frame Bumper Stop Std. brake vs Disc brake
« on: July 03, 2019, 06:57:49 PM »
Anyone know the difference in 67 w/o disc. 3939198 and 67 w disc. 3905575 lower bumper stops?
Bob

7
Originality / 67 05E Nor. Coupe Deluxe Seat Belt Date Code
« on: May 29, 2019, 10:51:41 PM »
What would the build week range be for a Nor. 05E with deluxe seat belts? I am thinking around week 15 - 20 of 67.
Searches show an 11B with week 42 of 66 (3-4 weeks)and 04-05 with week 4 of 67 (2-3 months). Very confusing.
Bob

8
Looking for measurements for 3916730 mounting plate. I have mounting plate 3954206, but because the hood catch support brace  was redesigned for 69, I need 3916730 mounting for my 67 build.
Bob

9
Restoration / Original 67 Turn & Haard Flashers
« on: February 25, 2017, 02:22:28 AM »
Need information on types of turn and hazard flashers used in both RS and non RS 67's.
I have part #'s from 67 AIM but they do not translate to type numbers and have no idea what the optional flasher # is used for, except maybe for RS.
Example: Tung-Sol 552
                  "     "   323
                  "     "   224
   "          Signal-Stat  175
   "              "     "      145
So if any members with a 67 RS with original flashers would chime in I would greatly appreciate the replies.
Bob

10
Decoding/Numbers / Hazard and Directional Flasher Date Code
« on: February 20, 2017, 08:59:34 PM »
How do you read date on flashers?
Tung Sol flashers have 3 numbers. Example 1 8 2
Signal Stat flashers have a letter and 3 numbers. Example S 376
Trying to do some research on correct flashers for 67 but there is more confusion than fact and very little fact.
Bob

11
General Discussion / Master Cylinder stamped SA
« on: May 17, 2016, 03:10:50 AM »
My 10-1-69 P&A has a listing for 67 Chevelle w/Disc Brakes, 67-69 Pass. Camaro w/Disc Brakes ....5469489  (11/8" dia. cyl.) (stamped SA).
I know the 67-68 MC's are stamped WT but was this the early 69 MC before it was  updated to the 5463751 and 309 casting stamped US?
Bob

12
Originality / 67 side mirror
« on: February 03, 2016, 12:45:11 AM »
Did 67 side mirrors have rings that held the glass in place?

13
Restoration / 67 AC vent Balls
« on: January 19, 2016, 04:56:06 PM »
Only search I found described the 67 AC vent bezels as being dash color but did not cover the vent balls.
Are they supposed to be painted dash color or chrome like so many others I have seen?
Bob

14
Originality / Original 67 AC Condenser
« on: April 23, 2015, 11:45:29 PM »
Anyone have pictures of original 67 ac condenser. I need one and the ones most vendors have do not look correct. From memory I thought the top of the condenser fins had a downward angle like that pictured in the AIM  C60 B1.
Help will be appreciated.
Bob

15
Does anyone have pictures of an original 67 under hood light (3903402), clip (3772788), hex screw w/washer (8-18 9420508) and external lock washer (121752)?
Also need picture of hood wire routing as 67 AIM U26 A2 routing is not correct, type fuse holder used and verification that connector at horn relay is the correct style.
Have done many searches over the years but very little usable information is available on this topic.
Help will be greatly appreciated.  ;D
Bob

Pages: [1] 2 3 ... 5
anything