Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Topics - john302

Pages: [1] 2 3 ... 11
1
Originality / 396 Air cleaner decal
« on: April 13, 2022, 10:29:23 PM »
Did the original 396 and 302 air cleaner decals have Made In The USA printed on the bottom? I see some repops have it and some do not  . Thanks

2
Originality / 1967 Air Cleaner silk screen
« on: April 13, 2022, 10:23:08 PM »
Is the silkscreen curved or square on a 1967 Big block chrome open element air cleaner lid ? I believe its square . Thoughts ?

3
Restoration / 1969 z/28 intake bolts
« on: March 20, 2022, 07:48:51 PM »
The intake bolts are black phosphated and painted silver after installation . The 1100 miles 1970 z/28 is a great example. They were probably brushed silver . The question is are the rear bolts for the sparkplug stands painted too? the center bolt that holds the vacccum advance tube painted ? sprayed ? brushed ? i have seen the spark plug wire stands brushed orange in the past . Thoughts ? maybe Lloyd or Steve S will chime in ? Thanks

4
Originality / 1968 console door flocking
« on: January 06, 2022, 09:05:06 PM »
is the underside of the console door flocked on a 1968 camaro ?its a 12d build date .All the 1969 doors i have seen or flocked . Not sure on the 1968s . Anyone have an original 1968 console ? Thanks

5
Restoration / Firewall insulation
« on: January 02, 2022, 08:30:07 PM »
Has anyone purchased a molded firewall pad lately ?Who is selling the best one ?Lots of different companies making them .Want the best one . Thanks

6
General Discussion / Lloyds 69z restoration
« on: December 26, 2021, 08:17:37 PM »
Cant find the restoration of Lloyds 69z. Were was that posted ? Really a nice and detailed restoration . thanks

7
Originality / 1969 z/28 radiator over flow hose clip
« on: December 26, 2021, 08:09:07 PM »
Looking for the placement of the radiator over flow hose clip . Also i am thinking it was painted when the radiator was painted ,because its soldered on . thanks

8
Originality / 1969 z28 Radiator tag
« on: December 26, 2021, 08:01:35 PM »
Getting ready to paint the radiator . The tag was installed before paint ? in the past i sprayed the tag when it was installed on the radiator . Also the fan shrould clips are installed after paint and are a grey/black phosphate finish ? thoughts ? thanks

9
General Discussion / Big block clutch adjusting rod and swivel
« on: December 15, 2021, 09:52:14 PM »
Does anyone know the gm part number for the threaded clutch adjusting rod and swivel for a 67-69 big block four speed ? thanks

10
Originality / 1968 L78/89 lower crank pulley
« on: November 05, 2021, 11:27:52 PM »
Is the lower crank pulley the stamped steel 923 or cast iron 108? For a 1968 L89 without powersteering ? I am sure an L 78 would be the same ? thanks

11
Originality / 1969 660 thermostat housings
« on: October 31, 2021, 11:33:49 PM »
Does anyone know when the 660 part number moved from the outer rim to the top ? i think there was a discussion on this before . thanks

12
Decoding/Numbers / 814 alternator date code
« on: October 31, 2021, 07:37:32 PM »
What would a Norwood built 05b solid lifter big block car have for a alternator date code ?Have seen a 8D30 814 . Does anyone know the date code before  8d30 814 ? thanks

13
Decoding/Numbers / 1968 m22 id tag
« on: October 07, 2021, 10:57:27 PM »
Does anyone know what the id tag is for a 1968 m22? i have a 3932259 tag and i believe its correct. Thoughts ?

14
Originality / 67 big block coil bracket bolts
« on: July 18, 2021, 12:44:35 AM »
Are the coil bracket to intake bolts for a 67 the same as a 68 or 69?Does anyone have a survivor 67 ? I am sure they are the same small block or big block ? Need to find out for a big block . Thanks

15
Originality / 1967 manual steering box i.d.
« on: March 28, 2021, 05:27:40 PM »
Looking for the casting number and general photos of a 67 manual steering box. I realize they are different from 68,69. It appears they have a casting date but no stamped assembly date like the later ones. Also the part number is cast on the bottom side . Does anyone have an original one I could see a few photos ? Thanks

Pages: [1] 2 3 ... 11