Topics

1

1969 - Orphans / M-21 VIN 19N622751 on MarketPlace!

« on: June 26, 2024, 06:49:24 PM »

Is in Mississippi and just got a message from seller, price reduced. 6 looks like a possible stamp over, could be a 5. Will check the orphan list for both derivatives. Thanks.

2

Maintenance / Adjust Steering

« on: February 26, 2024, 06:55:47 PM »

Have a lot of play in steering wheel. Manual steering. Car is SS396 L78. Do I loosen the nut on steering box and add to adjustment. Any help would greatly be appreciate. Car was contracted out on the restoration, but I done the cleaning up of steering box and can’t remember if I messed with the adjustment or not. Thanks!

3

Restoration / Blowing Fuses

« on: October 22, 2023, 06:43:34 PM »

My car is blowing fuses on my brake lights. Recent restoration and all new wiring harness throughout. Any quick check references would be appreciated. 69 SS396 L78.

4

Restoration / Temperature Gauge Increments

« on: June 29, 2023, 09:30:12 PM »

Can someone on here call out the increments on the temperature gauge. Is in console on the floor. Is the 1st mark 180 and so on after that. Newly restiored L78 engine. Live in the Deep South and it is hot here today heat index about 104. Couple days ago run it about 85 miles round trip to visit a new Camaro buddy with a numbers match COPO. Car ran consistently between 1st mark and 2nd mark on temp gauge. Puzzling though is it is losing fluids and can’t find it, On return trip after putting more 50/50 fluid in it, ran straight on the second mark, and needle flicked over the 2nd mark a few times before settling back on the 2nd mark. New 4-core radiator, 7 blade flex fan. I’m stumped on problem and fix. Guess I should have put this on garage talk, but I know got to be a restorer on here that May have had this problem before and can shed a little info. Thanks in advance.

5

Restoration / Seat Belt Restore

« on: May 16, 2023, 09:13:08 PM »

Looking for a source for seat belt restoration. All my belts are dated to my car, 02D build and cloth tags on belts is A-69’. All mechanisms are in good shape, mostly discoloration on the belts. Belt above drivers is some tear, and frayed, the shoulder belt. If 1 of ya has a remedy for coloring might could try myself, would be greatly appricated! God Bless.

6

General Discussion / Factory Chambered Exhaust-69’ 396

« on: April 21, 2023, 02:30:53 PM »

I’m in a little dilemma right now, I need help on determining the size on the exhaust from the factory for 396 Camaro’s. Purchased a Chambered Stainless Steel set back in 2019’ from 1 of Vendors, to be stocked for install at conclusion of its restoration. Here I am, ready to install, and my installer just ask me if I was sure I wanted this 2”  behind my mildly built L78, factory spec’d! Is all Big Block system’s at least 2.25 inches or 2.50 inches, is I guess my question? Only have owned car for 51 years, and very slight memory of Day 2’d removal of complete exhaust, and slight memory of all the dimples in the system. May be also could be dreaming of long ago. Thanks in advance for the help.