Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - 6667ss138

Pages: [1] 2 3 ... 35
1
General Discussion / Re: Ebay 69 Z/28 project
« on: April 04, 2018, 02:59:22 AM »
Congrats Dominic and welcome to the CRG, please keep us posted with pictures and progress on your Z as you go along. I'm sure it will be a beauty when you get her done.

2
General Discussion / Re: Survivor 69 Z-28
« on: March 25, 2018, 10:43:49 PM »
The owner contacted the guy who wrote that Camaro book , Jerry something to come look at the car and certify it as a real Z-28 .
When I asked in my post who the "fellow" was that was coming to certify, I was hoping that would be the name. You guys are in the best of hands! He literally wrote the book! Jerry certified three of my cars a few years ago. It was a great learning experience and he is a super nice guy. Let us know how it all went along with more detailed pics of the car when you can.

3
General Discussion / Re: Survivor 69 Z-28
« on: March 25, 2018, 01:10:15 AM »
Just curious, do you have a name of who the "fellow" is that is coming to certify? If they are a true first generation expert I assume they will be checking to see what all is factory original to the car such as paint, original sheetmetal, interior and especially the drivetrain numbers. Checking dates and part #'s on items such as distributor, carb, heads etc. Also confirming the VIN and hidden VIN's for match, checking the trim tag to see if it is the original with correct paint, interior, build date compared to the VIN, possible X code (depending on the build date). Checking to see if all the typical factory Z/28 assembly items are there, dual exhaust, correct leaf springs, tach red line.
The list goes on and on....

4
Originality / Re: 1969 muncie 4spd id tag
« on: March 05, 2018, 06:44:40 AM »
3946797 is for RPO M20 with Z28
3946798 is for RPO M21 with Z28
3950318 is for RPO m22 with Z28

I don't believe there were different numbered tags based on the rear axle ratio but someone will correct me If I am wrong.

5
Decoding/Numbers / Re: This stamp look original?
« on: February 16, 2018, 01:12:15 AM »
I'm by no means an expert but this assembly date stamp is 2 days before my born with block for my Z (V0528DZ)and I have been comparing them. They look identical. If someone has restamped it they are spot on. Hopefully Kurt will confirm one way or the other.

6
Decoding/Numbers / Re: New member trying to find out what I have- Barn Find
« on: February 15, 2018, 12:52:17 AM »
Check out this link and site for the NCRS info. There are some early VIN's that are not available including yours. That is what Kelley is referring to. "1969 Camaro 9N508855 to 9N587275" are missing and not available.
Congrats on your two new projects, very nice finds!
Just my opinion but I would definitely restore back to original the one with the original engine/drivetrain, especially with it being a RS/SS, Big Block, 4 speed, A/C car. I personally like the frost green cars with black vinyl top and the black interior. It would be a beauty!

http://www.camaros.org/forum/index.php?topic=11724.0

https://www.chevymuscledocs.com/

7
General Discussion / Survivor Craigslist 69 Z
« on: February 04, 2018, 04:04:35 PM »
Not mine. Hefty price, would be nice to see more and better pics. What do you guys think?

https://detroit.craigslist.org/mcb/cto/d/camaro/6483613044.html

8
General Discussion / Re: X Codes
« on: January 23, 2018, 12:57:15 AM »
I am not sure about the LA cars but the Norwood plant did. I have an early 10D 69 Z/28 and during inspection JM found a X7 crayon marking on the bulk head behind the rear seat. I assume that is what they used going down the line to let them know how and what to assemble.

9
Garage Talk / Re: MCACN 2017
« on: December 03, 2017, 02:15:31 AM »
I saw that earlier today on the front page of my internet news feed. Congratulations Jon! I assume that went all over the world :)

10
Garage Talk / Re: MCACN 2017
« on: November 25, 2017, 04:15:44 PM »
I had to cancel my plans to go this year. Hopefully next year.
Here is a link to some great pictures from Bruce over at the Yenko.net site.

http://www.yenko.net/forum/showthread.php?t=145649

11
General Discussion / Re: Quality Chevrolet - Wichita, KS
« on: October 21, 2017, 07:18:01 AM »
I just remembered the most recent story of getting a KS DMV title history for a buddy of mine. He had done a lot for me on my 67 Chevelle SS convertible and I wanted to do him a favor. We knew his 69 RSSS big block car was purchased new here in the Wichita area. About two years ago I gave him a cool surprise by getting the DMV title history information on his car. We found that it was purchased new in the same small town outside of Wichita that he went to high school in. When he saw the original owners name he knew it rang a bell. It turns out that he had dated this fellas daughter while he was in high school.   ;)
His car has just recently completed a frame off restoration and at one of his first car shows he went to he connected with the original owner and got pictures. :)
So you just never know!

12
General Discussion / Re: Quality Chevrolet - Wichita, KS
« on: October 19, 2017, 01:29:02 PM »
Does anyone know much about or have any information on Quality Chevrolet Wichita, KS?  One of my cars was originally shipped there per the NCRS report.  I haven't been able to find much information other than it became Davis-Moore Chevrolet in the late 90's.
My home town. It was in downtown Wichita, the building is still there but I haven't driven by in a while. Not sure it is even a used car dealership anymore. What questions do you have?
As far as I know Kansas still offers DMV records back to new, go to the KS DMV site and there should be a form you can send in and for a few bucks and you will receive all Kansas owners back to new as well as a copy of the original MSO.
Hope this helps. Good luck!

13
General Discussion / Re: CRG Forum is back up!
« on: October 11, 2017, 07:59:37 PM »
Thanks for the hard work to get us back up. My fingers would automatically start trying to check in every day. I had to slap my hand a few times and so no.  :o

14
Originality / Re: 69 Z/28 Water Pump Pulley Real or Repro
« on: September 26, 2017, 12:50:12 AM »
One more

15
Originality / Re: 69 Z/28 Water Pump Pulley Real or Repro
« on: September 26, 2017, 12:35:09 AM »
A couple more

Pages: [1] 2 3 ... 35