1
Restoration / Re: Windshield Lower Trim Clips & Outboard Screws
« on: August 01, 2023, 09:19:09 PM »
1/4" ??...I retract my statement regarding difficulty (with fenders installed). lol
News:
Welcome to the CRG Discussion Forum!
Classified ads are not allowed on the forum.
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
2
Decoding/Numbers / Re: 1967 Camaro Z28
« on: July 27, 2023, 09:18:37 PM »
Which raises more questions as the rivets obviously are not factory. Does the tag even belong to the car? It might help if you post the VIN.
3
General Discussion / Re: The Camaro Nationals
« on: July 22, 2023, 10:00:35 PM »Also any more photos/info of/on the black 68?
Would like to (or maybe I wouldn't) hear the story on those hubcaps (67)....
4
Restoration / Re: Windshield Lower Trim Clips & Outboard Screws
« on: July 21, 2023, 10:43:22 PM »
I think they're the same as used for the inner clips....https://www.ebay.com/itm/403079898608?hash=item5dd96f25f0:g:CJAAAOSw08FewJPs&amdata=enc%3AAQAIAAABAJpGb%2BzNYQNfOgipGlGi6dc2JG7NhahaEQzNJmlRvs9XXV1o4DQ%2BOOuDwD74U9rP3AQ%2BpCpYvpf%2BzSyk8IohdBOKt04JZlqXdW0Yb%2BZCd1dqsjSBqUNZK8WMYCRx%2BYVOxq39lSdekgsowhaFShBcyjJ085Xj4k2meFvjMEoFU%2BViuRuyN6MFxOufQBeN%2BHPMX2QnwAwvVdYswofLmOZA8Y%2BXkzTfi4I4n1mIdnGthtE2IKPBGtRQRc2YqB617t8wDcyJi8eF0p61BfW2a3o5C4YptInrv2Ita5TKPa%2FUUOcEN%2FLzrftrKH8MkmhJ93m4DuI5MTsA1PcjNiCuDhDsqZM%3D%7Ctkp%3ABk9SR96Uy6mvYg
Not that difficult to do with the fenders on if your fingers aren't too fat....
Not that difficult to do with the fenders on if your fingers aren't too fat....
5
General Discussion / Re: Exciting find to share.
« on: July 20, 2023, 09:25:22 PM »
Not black, "natural" is correct.
6
Restoration / Re: Identify type of seat back foam required
« on: July 13, 2023, 10:19:16 PM »
69 had the 2 types:; springs separate from the foam as in 67-8 and later had springs integrated into the foam as in your picture.
These are separate springs..
These are separate springs..
7
General Discussion / Re: Question about rear of car being to low
« on: July 09, 2023, 05:35:16 AM »
I'd say the front is a bit high. It likely will settle if the restoration is still fresh. Of course the rear may also. 
Suspension components (a-arms in front, shackles in the rear) should not be tightened until the entire vehicle weight is on the suspension. You could try loosening the front a-arms and leave it that way for a few weeks to see if it settles.
A photo of the rear suspension from underneath may be helpful...
Suspension components (a-arms in front, shackles in the rear) should not be tightened until the entire vehicle weight is on the suspension. You could try loosening the front a-arms and leave it that way for a few weeks to see if it settles. A photo of the rear suspension from underneath may be helpful...
8
General Discussion / Re: Find your hidden VIN in less than 30 seconds.
« on: July 07, 2023, 12:04:39 AM »
I like yur trend of thought... 
Dang-it, my emoji doesn't work.
Dang-it, my emoji doesn't work.
9
General Discussion / Re: Find your hidden VIN in less than 30 seconds.
« on: July 06, 2023, 09:47:05 PM »
Is the VIN in a 67 door jamb considered hidden?? 
10
1969 - Orphans / Re: 1969 Z-28 Drive train 19L519638
« on: June 16, 2023, 08:49:16 PM »Probably is a RestoMod now with a hemi and a blower.
Man, yur gettin' old (like the rest of us) and/or don't hang out at Team Camaro enough! LOL It's probably a "Pro Tour" now, LS of some sort with 20" wheels.....SMH
11
Originality / Re: Brake Master Cylinder 5452310 Bale Wire
« on: June 13, 2023, 02:47:17 AM »
Thinking more about it, it probably is some type of spring stainless steel. Just my guess... I'd probably lightly wipe it down with 0000 steel wool for cleaning, but maybe that's a no-no ? Sorry if I'm creating more confusion.
12
Originality / Re: Brake Master Cylinder 5452310 Bale Wire
« on: June 12, 2023, 07:40:35 AM »
Must've been more than just a natural finish, otherwise it'd be rusty like everything else there. And if no rust, I don't see a need for Evaporust. It may do more harm than good..?
13
General Discussion / Re: 1968 L89
« on: June 03, 2023, 05:44:23 PM »
More than I would've guessed!
14
General Discussion / Re: 1968 L89
« on: June 03, 2023, 08:19:24 AM »
British Green would be January or later, but I'd certainly like to hear about it. How many 68 L89's are there in the DB??
How many 68 L89's are there in the DB??15
General Discussion / Re: 1968 L89
« on: June 02, 2023, 11:41:49 PM »
Well, 2 outa 3 ain't bad (drivetrain ?, color-check, photos-check)! 4spd?
Without docs or the OE block, pretty much impossible to document an L89 from a L78. Is that a fair statement?
Thanks for divulging!
Without docs or the OE block, pretty much impossible to document an L89 from a L78. Is that a fair statement?
Thanks for divulging!