Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - monaroman

Pages: [1] 2 3 ... 5
1
Mild Modifications / Headers for a 68 bb
« on: August 09, 2017, 09:27:29 PM »
Hi,

I have a 68 396, factory ac, factory exhaust set up Camaro of which I'm thinking of installing some headers.
I have spoken with Holley and they have short headers that would suit my set up this includes a bracket for the ac and overcome the factory plug angle.

Anyone used this set up or perhaps another brand?

Thank you.

2
Garage Talk / Re: 68 Camaro brakes disc/drum
« on: August 09, 2017, 09:21:39 PM »
Hi,

Thank you z28z11 and other members.

Found a very small intermittent small leak on the new rubber seal which holds the check valve. Replaced and bench tested. This was done at the rebuilders workshop. Installed and started softish pedal on start up. A long cruise and the brakes performed really well. A little firm but perhaps some final adjustments may improve that. Enjoyed the learning curve.

Cheers.

3
Garage Talk / Re: 68 Camaro brakes disc/drum
« on: July 25, 2017, 10:14:22 PM »
Hi 68Zproject,

I think your on the right path with push rod length. I can't loacte a solution but I'm thinking extend the thread on the push rod and trim push rod length to suit?

Hopefully this weekend I shall a have a play if weather is good.

Thank you.

4
Garage Talk / Re: 68 Camaro brakes disc/drum
« on: July 10, 2017, 10:44:15 PM »
Hi,

I replaced the hose fFrom the manifold to check valve still hard brake pedal at idle. 18"inhg at idle.i removed the master cyclinder and started the engine. The booster piston moved freely once brake pedal was pressed.

I manually moved the booster piston out once the car was running and it returned to normal position in the booster once I released it.

I noticed the metering valve/hold off valve at the rear of the body has a silver plug type shape. Does that require resetting in the out position?

Any help would be appreciated.

Thank you.

5
Garage Talk / Re: 68 Camaro brakes disc/drum
« on: June 21, 2017, 09:35:40 PM »
Hi arocars,

Thank you for taking the time out to do a little reseach. John Z has a good article of disk brake set up and how the components function. It's on this web site.

Hopefully have a play this weekend.

Cheers.

6
Garage Talk / 68 Camaro brakes disc/drum
« on: June 19, 2017, 10:54:27 PM »

Hi,

Had the power assist unit repaired and a new check valve. Still having hard brake pedal issues. 18" of vacuum present. No other work performed on the braking system.

Any suggestions please?

7
Originality / m20 bolt markings
« on: September 27, 2013, 06:58:01 AM »

Hi there,

I have a m20 with the following numbers on the casings- 5660, 7584, 4685.

Ive searched around CRG and Team Camaro but am still after a little more clarification on the bolt markings required for the given sections of my m20.

My camaro was assymbled at the Norwood plant 68...

Thank you.

8
Originality / Re: Big Block Distributor Hold Down Clamp
« on: August 23, 2013, 10:52:55 PM »

Hi there,

Looking to purchase a GM stamped style distributor bracket.

Does anyone have a accurate photo front and back of the stamped style bracket?

What was the bolt marking?

Thank you.

9
Originality / Re: Big Block Open Element Air Cleaner
« on: July 31, 2013, 06:11:37 AM »

Hi there,

I have a 68 NOR L35 4A camaro.

Im assuming my lid would be chrome with the curved font?

Thank you.

10
Restoration / Sheet metal fixings
« on: December 18, 2011, 04:17:43 AM »


Hi there,

Ok, for me this is the million dollar question (at present).

I attended the Camaro Nationals this year and LOVED it....

I got a tonne of photos form the survivour first gen camaro's.

Im looking to restore my 68 April body build camaro ss.

I really need information as to what fixings, markings and colour were attached to the sheet metal.

Thank you CRG great site with pleny of information.

11
General Discussion / Original 396 engine
« on: June 19, 2011, 09:13:59 PM »
Hi there,

I  decided to come to america and try and locate the original engine to my 68 camaro. Im only here for a coupe of weeks so any suggestions would be appreciated. I have searched the 68 orphans section.

Its a needle in a hay stack.excercise but I have to try.

The background. The engine was sold to a fella in the fort worth/mid cities texas area mid 75. I have no contact details of who the engine was sold to and the original owner of my.68 has no information to offer up.


VIN 8N408678


Thank you

Edit;  I took the assembly date out of your post.  Your just asking for a scammer to stamp you an engine with the correct info by posting all the info.  If someone has it make them provide the assembly dates and codes to prove it.  Don't post all the info, just the VIN.

12
Originality / Engine and components
« on: February 18, 2011, 09:08:25 PM »


Evening,

I have read alot of discussion papers/posts from this site and it has helped to understand what is required from a date coded engine and components.

The engine is the only non original part of the driveline to my camaro. I have been lucky enough to purchase a date code correct one (396) though. The POP has the engine assembled on the 22nd of Feb, the body start date is April 1st week.

I reqiure alternator, carbie, starter motor etc for a 396.

Would the engine dress assembly section (from factory) MORE THEN LIKELY use Feb date coded #'s or March #'s. I know abit of a how long is a peice of string questions.

I guess i need to satisfy my mind that the direction im heading is more than likely #'s correct from assembly in 68.

Any members with #'s matching 396 engines are more then welcome to post a reply.

Thank you guys.

13
General Discussion / First Gen Camaro Car Shows 2011
« on: January 14, 2011, 10:26:26 PM »
 
Hi there,

Is there a link for the Camaro car shows which contain dates and locations for 2011?

If not,  were are the best 1st gen shows located (in the past) and there dates for 2011?

Im really after interesting original camaro's (drags also)...

Any assistance would be appreciated.

Cheers.

14
Decoding/Numbers / Re: 68 GM part numbers
« on: January 10, 2011, 06:23:24 AM »

Hi Dutch,

How are you mate?

I performed a search on this site before my post.

There are some interesting Q&A regarding repairing, painting and re chroming pitted chrome.

Im trying to purchase good quality NOS,  i love the # thing associated with my Camaro.

Try "68 tail light bezels" as a search title.

Enjoy!!!

15
Decoding/Numbers / Re: 68 GM part numbers
« on: January 09, 2011, 02:36:33 AM »

Hi Paul,

Thank you.

Do you know of any references i can get in regarding to GM part numbers?

Cheers bud.

Pages: [1] 2 3 ... 5