Messages

1

Mild Modifications / Re: How do I get a 67 Camaro to wheelstand (serious question)

« on: June 30, 2011, 02:20:46 AM »

Push down on Right pedal LOL
 cal tracs traction bars are worth every penny and are and will need adjustment to dial in .
some 90/10 shocks up front undo sway bar end links up front for weight transfer also.
Lastly very sticky tires MT Is what I run 275/60/15 with about 12.5 psi in them.
Good luck Happy Flying

2

Mild Modifications / Re: How do I get a 67 Camaro to wheelstand (serious question)

« on: June 30, 2011, 02:01:54 AM »

Looks like my 67RS

3

Originality / Re: Not sure If these were factory

« on: January 03, 2011, 02:03:14 AM »

I found some that look close for a 66 67 chevelle on Ebay

4

Originality / Not sure If these were factory

« on: January 03, 2011, 01:13:16 AM »

They are GM and sst and go where the wind lace goes and has seat belt strap holders what years  does it fit 67 68 69 I believed 69?
I have pic working on getting it on
They go on the inside??

5

Decoding/Numbers / 69 302 block numbers and mains???

« on: February 12, 2010, 08:59:53 PM »

Hi all i have a 69 302/327 block number 3956618  but it is a two bolt block was there 2bolt 302 and 4 bolt 302s thanks for any info.

6

Decoding/Numbers / Re: Odd numbers on rear see pic

« on: June 09, 2009, 11:50:24 PM »

anyone else with  an H ??

7

Mild Modifications / Re: Suffer from Big Cam no Vacuum!!

« on: June 07, 2009, 10:27:27 AM »

I did try the Can but does not work I also have a small aftermarket brake booster 4 wheel disc set up, will have to do a electric pump I guess.

8

Mild Modifications / Re: Camaro trunk custom close in or divider boards

« on: April 27, 2009, 12:13:13 AM »

nice link thanks for thatone AAA+++

9

Mild Modifications / Re: Suffer from Big Cam no Vacuum!!

« on: April 27, 2009, 12:05:40 AM »

I do not make any vacuum with the cam i run so I can not make any in a can from them . I am looking for a 12 volt one Other then the high dollar ones i keep finding. Thanks

10

General Discussion / Re: all original looking 67 pulling a boat pic !

« on: April 12, 2009, 01:53:09 PM »

The trailer looks shinny!

11

Mild Modifications / Suffer from Big Cam no Vacum!!

« on: April 08, 2009, 12:50:57 AM »

Hi all I am Guss! Hi Guss !I suffer from Big Cam No VACUUM (LOL)
What are some of the electric vacuum setup people are using and with and info and pics would be good. i seen one not sure of make all billet and like a small box  about $450 I was looking for a low dollar cure There are so many vac pumps out there I though   I would ask. Thanks

12

Restoration / Re: Paint job

« on: April 08, 2009, 12:41:46 AM »

I love The yellow!! NICE

13

Restoration / Re: Fire wall tag rivets?

« on: April 08, 2009, 12:40:14 AM »

Hi Thanks they got right back to me seem to be nice people sent my check for the rivets and tool thanks again

14

Restoration / Fire wall tag rivets?

« on: April 03, 2009, 09:38:15 PM »

Hi all I am helping a buddy put his car back together. the body shop took the fire wall tag off Now i have the job of putting it back on with the car all back together brake booster in the way and all. So I am not sure on the correct rivets to use to put his tag back on . I seen some on Ebay not sure if they are right this is the link I will have to look at ricks and a few other suppliers. thanks for any info.

http://cgi.ebay.com/ebaymotors/COWL-TAG-RIVETS-NOS-GM-CHEVELLE-SS-CAMARO-GTO-Z28-TRIM_W0QQitemZ350183258490QQcmdZViewItemQQptZMotors_Car_Truck_Parts_Accessories?hash=item350183258490&_trksid=p4506.c0.m245&_trkparms=72%3A1205%7C65%3A12%7C39%3A1%7C240%3A1318

15

General Discussion / Re: need Help with brackets alt p/s sbc short water pump

« on: April 01, 2009, 12:08:11 AM »

The chrome ones for headers  that ricks sells does not work on my car it gives me a misaligned belt and leak header. that is why i moved my alt to pass side in the late 80s. need some help see what people are using?