Messages

1

Originality / Re: 68 Shoulder Harness

« on: May 17, 2023, 01:24:07 PM »

Thanks Clete for reply. So I guess another way to distinguish the difference is Chevelles used a buckle on the 1952 front shoulder harness, while Camaros used the insert. ?

2

Originality / Re: 68 Shoulder Harness

« on: May 16, 2023, 04:33:34 PM »

Yes, I checked the CRG link first thing. It shows TBD for rear shoulder belt. Reading some of the other post makes me think rear shoulder belts.
Looking at this thread, I probably should have started a new one. I will try to upload a full size pic.

3

Originality / Re: 68 Shoulder Harness

« on: May 16, 2023, 02:25:49 AM »

Since we’re on the topic of seat belts. My research is not coming up with a # 1902
69 Camaro (716- Blue) Deluxe Seat belts. 2-1952 - Front Lap, 1-1914 - Front shoulder, 2-1902 shown with small buckle. Is this rear shoulder belts…?. Dated early 69. (34th wk, 68). Would like to determine RPO for this set. The only cover I have, had both a 1952 and 1902 together if that helps.

4

Originality / Re: 68 Shoulder Harness

« on: May 04, 2023, 01:38:10 AM »

Thanks

5

Originality / Re: 68 Shoulder Harness

« on: May 04, 2023, 12:09:18 AM »

Thanks that may be helpful. I was looking for my original 13A69 front std. seat belts when I came across this belt.

6

Originality / Re: 68 Shoulder Harness

« on: May 03, 2023, 05:20:31 PM »

Thanks David K. Mine has definitely been trimmed.

7

Originality / Re: 68 Shoulder Harness

« on: May 03, 2023, 02:42:40 AM »

Yes, I had looked at that report prior to posting, and the reason I questioned the length.
I never thought of it being cut off. Good catch. I will compare it to some other belts.
Sometimes it just takes a different view. Thanks for the look.

8

Originality / 68 Shoulder Harness

« on: May 02, 2023, 05:08:56 PM »

 Thank you in advance.  I have a Std interior, black seat belt, w/buckle that shows a model# 277. Dated 28th wk of 68. Researching CRG I thought it was a front shoulder harness for coupe, but length of belt measures approx. 21”. Would this be a rear shoulder belt or maybe for a convertible?  Any assistance is appreciated.

9

Trans-Am Camaros / Re: 302 Trans Am pistons

« on: February 18, 2018, 12:04:30 AM »

I thought the same about using one ring on a long road course race

10

Trans-Am Camaros / 302 Trans Am pistons

« on: February 17, 2018, 06:39:39 PM »

All
I have came across a piston/rod combo, that I would like to learn more about. They are a 5.7 sm. journal BRC rod, 4"bore piston using single ring and single lock on piston pin. Only markings on pistons are casting of 51010 on inside. Supposedly they are road racing 302. that have been packed away for years.
Compression distance measures closer to 350 piston or possibly a 6" rod 302....? not the 5.7 with them
Curious if anyone remembers this, or a similar combo used in any first or second gen. LT1 trans am racing.

Thanks in advance.

11

Originality / Re: 67 L78 PEOPLE Check in

« on: August 25, 2008, 01:05:24 AM »

How many of the 4K cars in your database are rag tops