Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - Don_Lightfoot

Pages: [1] 2 3 ... 8
1
Restoration / Re: Trunk stickers that don't lift?
« on: September 30, 2016, 03:21:13 PM »
I'll get one out to you first of the week Dave.

2
Restoration / Re: Trunk stickers that don't lift?
« on: September 30, 2016, 02:17:45 PM »
Dave, was that particular decal laminated? I believe you ordered two of them about a year ago which may have been before I started laminating that particular decal due to a considerable amount of input on this board suggesting it would be better if it was laminated. I will be glad to send you a new one if you like, just let me know.

3
"D off a 01C and a 09A car"

Kurt, do you know if that 09A car is from September of 1968 or September of 1969?

4
Restoration / Re: 69Z Emission Decal(s) - revisited
« on: July 20, 2016, 07:47:33 PM »
Bill, I used pictures provided and width measurements provided by other enthusiasts as I mentioned in our last emails of March 24, 2016.  I'll make up a wider set and send them out to you.  We're having a labour dispute up here between Canada Post and the Union so they may not go out until matters are settled.  I'll keep you posted.

5
Restoration / Re: 69Z Emission Decal(s) - revisited
« on: July 20, 2016, 01:12:59 PM »
Yes Bill, I can make them wider if necessary.

6
Restoration / Re: 69Z Emission Decal(s) - revisited
« on: July 19, 2016, 01:19:15 PM »
Certainly was not intentional Ko-Lek-Tor (don't see your name in the post or in profile). On my website this label highlights all three engines equally. I was just going by what the demand has been over the years as per specific engines.

7
A lot of you know we have done one of these particular decals for years now and it is one of our most popular items for 69 Camaros.  Over the years I have had numerous requests for some of the other versions of this decal.  There was a very lengthy thread on this a few years ago.  I have had to decline pursuing others as they are very difficult, intricate and time consuming to do in an effort to get them as accurate as possible.  Furthermore, my computer guru buddy got married again a couple of years back and his time was being devoted elsewhere.  Well, we can now commit some time to other decal projects.  In fact, we just completed the most accurate LS6 Emission Decal available.

A number of enthusiasts have forwarded pictures of originals and I thank you for that.  I have kept on file pictures from Mike Gooding (two different versions) and Bob Watroba (separate version).  We are going to take a look at these other three versions.  I cannot make any promises that we will be successful, so please stand by for progress.

I have uploaded a PDF file with copies of the four different versions.  Maybe there are more versions as well, but these are the four I am aware of.

There are actually numerous differences between each of the four versions.  Most of these are simply a matter of alignment for each of the various lines.  However, one of the main differences is the letter “S” at the end of the top line.  Two versions have the “S” while two do not.  In the attached PDF file you will note that examples “A” and “B” do not have the “S”.  The one we have done is picture “A”.

What I would like to know from the Camaro gurus on here is where (plant) and when (months) might have used each of the four examples.  I can guarantee that if we do get these done, and I add these three other decals to my website, the main question I will likely get is “Which one is correct for my car?”

Thank you in advance for any clarification.


8
Site Comments/Discussion / Re: Is it possible to upload a PDF file?
« on: July 18, 2016, 08:12:34 PM »
Thanks Ed

9
Site Comments/Discussion / Is it possible to upload a PDF file?
« on: July 18, 2016, 07:56:46 PM »
Thanks.

10
Originality / Re: Would appreciate a picture
« on: November 08, 2015, 06:15:14 PM »
Thanks for the kind words Paul.

I found an image on-line which was said to be from a 69 Camaro.  Anybody able to confirm this?  Thank you.



11
Originality / Re: Would appreciate a picture
« on: November 08, 2015, 12:34:28 AM »
Appreciate the input and the picture Mike.

I am not knowledgeable enough to say the 67 style is the same as the 69.  Maybe somebody else on here can chime in.

The only original picture I have on file is for a 70 Chevelle.  The font is slightly different than that 67 Camaro, but the spacing between the two letters is also quite wide like the 67 Camaro.

Thanks again Mike.

12
Originality / Would appreciate a picture
« on: November 07, 2015, 09:20:03 PM »
I am looking for a picture of an original 69 Camaro shock decal.  Also, the measurements would be appreciated.  Main item of interest is the font that was used (which I should be able to determine), in addition to seeing the spacing between the two digits.  I'm trying to fine tune my decal offerings service.  Thanks in advance for any help.

13
Restoration / Re: emission sticker reproduction
« on: November 03, 2015, 08:40:16 PM »
Guess we can't win Andy  :-\  Yours is obviously one of the type I don't do. Money refunded.

14
Restoration / Re: emission sticker reproduction
« on: October 31, 2015, 09:41:43 PM »

Ok I see the issue, these pictures are in a protected album on Team Chevelle. If their showroom works the same as our over at Team Camaro, then you must be a member of Team Chevelle to see these.

Interesting, thanks for the input. Always good to learn something new every day. I've uploaded them to my regular photo hosting site which should make a difference. In the first picture notice the light reflection in the "laminated" decal, but not on the "regular" decal.  Light was off for the second picture. Hope this helps.







15
Restoration / Re: emission sticker reproduction
« on: October 30, 2015, 04:14:42 PM »
STRANGE Andy. Wonder if other viewers have the same problem. I'll email the pictures to you.

Pages: [1] 2 3 ... 8