Messages

1

General Discussion / Re: 69 console gauge light socket

« on: May 07, 2020, 02:08:54 PM »

Thanks Ed, appreciate it. 

My main concern was just finding one that would clip into the hole and stay in place. I'll check this one out.

2

General Discussion / 69 console gauge light socket

« on: May 07, 2020, 06:40:03 AM »

Hello, does anyone know where I could get replacement sockets for the center console gauge lights? Any help would be appreciated.

Thanks!

3

Maintenance / Re: Changed booster, master, distribution block and hold off valve - Won't bleed

« on: May 09, 2019, 01:54:56 AM »

Hey Steve, thanks for the response and taking the time!

Nothing else was replaced except the aforementioned items. I did not flush the lines. The items were purchased from Inline Tube Company. I'm sorry I don't know anything more about the mfg., brand or quality.

4

Maintenance / Changed booster, master, distribution block and hold off valve - Won't bleed

« on: May 09, 2019, 12:12:53 AM »

So I replaced the booster, master, distribution block and hold off valve with all new parts. I bench bled the master before installing. I hooked up all the lines and went to bleed the brakes, starting at the farthest wheel. I have tried manual bleeding with someone pumping the brakes, I tried a handled vacuum pump and also a vacuum assisted (compressor) bleeder and I am not getting any fluid. I have tried the other rear wheel and then the drivers front wheel and I get no fluid from any of them. I've checked several (not all as some are hard to get to) of the connections going in and out of the master, dist. block and hold off valve and each will leak fluid when I depress the pedal. I am not a mechanic and don't know what else to try. Any help would be greatly appreciated. Thanks!

69 Camaro
Front Disc / Rear Drum