Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - cars1234

Pages: [1] 2
1
Originality / Re: New front coil springs proper stance..
« on: September 28, 2018, 11:52:24 PM »
If that's correct i'm at 11.5" right now..at least 2" high so now do i cut the spring videos on line show 1" of spring equals 2" of body drop. any advice?

2
Originality / Re: New front coil springs proper stance..
« on: September 28, 2018, 11:42:51 PM »
Tim,according to the AIM if i measure from the center of my wheel back 33" i should measure from the ground to the bottom of the rocker panel between 9 and 9.5" Did i read that correct?

3
Originality / New front coil springs proper stance..
« on: September 28, 2018, 11:06:18 PM »
I ordered new coil springs for my 69 camaro and put a front disc brake conversion kit on it ,
The springs i ordered was for a 1969 305 motor w/o A/C but the front looks high 28.5 from fender to ground..
Anyone know the correct height so i know how many inches too high my front is I have 14" Rallys on it.
please see pic attached..

4
Originality / Re: 1968 ss/rs casting numbers. Block and heads
« on: September 24, 2018, 11:49:24 PM »
 I believe the 2 year warranty was in effect then so if you go with a CE block you can go with
3916323
3935440    
3955272
3969854
maybe several others from 68 to 70 years I just came across a late 69  402/375hp CE motor on Craigslist just another option to think about.

5
Originality / Re: 3 different intakes same cast number 3927184
« on: September 24, 2018, 10:55:11 PM »
OK,do you know what month in 69 it went away? or do you mean 1968 was last year for oil fill tube?
Could my January build date technically  have either a fill tube or no fill tube?
like the rear 68 spoiler on early 69 Camaros?

6
Originality / Re: 3 different intakes same cast number 3927184
« on: September 23, 2018, 09:18:20 PM »
I bought 1 off ebay has a date of A 15 9  on it but i noticed others with 68/early 69 dates with and without a fill tube and some dont have a fill tube in the casting..Does CRG have a section for Intake cast# for camaros?

7
Originality / Re: 3 different intakes same cast number 3927184
« on: September 23, 2018, 12:30:56 PM »
heres other pics wont let me do all 3

8
Originality / 3 different intakes same cast number 3927184
« on: September 23, 2018, 12:26:42 PM »
I'm a bit confused about this intake 3927184 seems 2 or maybe 3 versions of the same intake was made
1.with oil fill tube.
2.with oil fil tube but plugged /cast over
3. no oil fill tube or plug in the cast.
 which if any is correct for my 1969 Camaro its an early January 69 build date and it also has a 68 spoiler on the back which I'm told is correct for an early build 69 thru internet research.
Any help much appreciated.

9
Restoration / Radiator core support bushing replacement
« on: July 31, 2018, 12:53:29 AM »
I want to replace my bushings on the radiator core support and I want to know what i have to loosen or remove to move the core support high enough to be able to replace the bushings? do the fenders need removed or just loosened up?
Also thinking about grinding the one under the battery box off and re welding a new one on does anyone make just the bracket not the whole core support?

10
1969 - Orphans / Re: 9N647308 - L72 COPO T0512MN
« on: July 20, 2018, 10:39:23 PM »
no title history found on this site  https://dmvdesk.com/reports-2/nmvtis/ under 124379N647308

11
Originality / Re: 1969 camaro 307 1 owner car ?
« on: July 16, 2018, 01:05:27 PM »
Darrell,I say seen that meaning as i read it! I as a novice could/probably  get a different interpretation then what is meant! I have no problem googling and reading but the meaning,definition and interpretation that I get is probably different than what is meant  so I rely on the experts opinion not to steer me wrong rather than what i read/see
 X11* non-SS396, non-Z28,   
      includes SS350         
 

12
Decoding/Numbers / What kinda 1969 Camaro TRIM TAG is this?
« on: July 15, 2018, 08:09:57 PM »
I seen this trim tag on a 1969 Camaro today at a car show it had Z/28 badging is this a screw up or a YENKOPO?

13
Originality / Re: 1969 camaro 307 1 owner car ?
« on: July 15, 2018, 02:09:39 PM »
Tim does that mean it coulda came as an R/S or SS or could be turned into one of the aforementioned?

14
Originality / Re: 1969 camaro 307 1 owner car ?
« on: July 15, 2018, 10:19:19 AM »
I seen that Darrel but that means every car that was a 350 SS or less was a X11 Code..LOL
What exactly does that X CODE mean ?
Thanks

15
Originality / Re: 1969 camaro 307 1 owner car ?
« on: July 15, 2018, 12:19:09 AM »
Hi,I checked the car out today very nice has some issues but it has a X11 code on the cowl tag what exactly does that mean?

Pages: [1] 2