Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - BobH11

Pages: [1] 2
1
Maintenance / Re: ideal 4053 jetting for stock 302/30-30/manifolds
« on: August 19, 2018, 09:32:21 PM »
Aaronz28,  you might want to check the accelerator cam and squirter nozzle size. I had kind of the same problem, the car never revved cleanly from idle. I found the accelerator cam was the flatist one. The kit I got had 5 cams so I changed to the middle one and also changed the squirter from 28 to 32.
This made a big difference with the off idle problem.

2
Decoding/Numbers / Re: 12 bolt (BW code) casting date?
« on: July 31, 2018, 12:15:14 AM »
It’s just a month different from the stamping, so it seems reasonable.

3
Maintenance / Re: 69 RF brake lock up?
« on: July 31, 2018, 12:12:06 AM »
Myblue67, I had a similar problem with my 69. With mine the rear brakes would lockup instantly. After replacing all the rear brake parts, turns out the front brakes weren’t working at all. Seams both front rubber lines swelled and the metal bracket that supports the line wouldn’t let any fluid thru. Maybe check your rear brakes to make sure they are working properly.

4
Decoding/Numbers / Re: 12 bolt (BW code) casting date?
« on: July 30, 2018, 11:59:38 PM »
Looks like E 12 8

5
General Discussion / Re: red 69 Z, original, but a project on ebay
« on: July 27, 2018, 07:41:36 PM »
Is that a power convertible top switch next to the wiper switch?

6
General Discussion / Re: A little help valuing one of my ‘69s
« on: July 22, 2018, 09:45:34 PM »
If he can't convince you to sell with an offer your willing to take..I wouldn't let pestering bother you.

7
Restoration / Re: Rear drum brake backing plate questions.
« on: May 05, 2018, 09:28:31 PM »
The larger center hole backing plates are for non c-clip rears.

8
Restoration / Re: Custom Chevrolet Badge
« on: February 11, 2018, 03:15:57 PM »
I found something similar and it was a glovebox emblem from a chevy truck.

9
Site Comments/Discussion / Re: Slight mistake in the a-arm section
« on: January 17, 2018, 08:32:32 PM »
Your right sorry ,I was looking at a picture of mine and it looked like the leading edge was the flat side.

10
Site Comments/Discussion / Re: Slight mistake in the a-arm section
« on: January 17, 2018, 08:24:46 PM »
The bump stop location, 68 to the back 69 to the front.

11
Site Comments/Discussion / Slight mistake in the a-arm section
« on: January 16, 2018, 09:38:23 PM »
I noticed the 1968 and 1969 picture labels are switched, but the description is correct.

       Thanks, Bob

12
Maintenance / Re: gauge cluster lighting
« on: July 17, 2017, 11:23:54 AM »
That's it ...Thanks Kevin

13
Maintenance / gauge cluster lighting
« on: July 17, 2017, 10:35:23 AM »
could someone tell me what this is. It seems plug in behind the oil pressure gauge.

14
Decoding/Numbers / Re: VIN verification
« on: July 12, 2017, 09:05:47 PM »
I got the car from someone I know, he gave me the paper work he received which included pictures of the trans numbers and the engine numbers. He had bought the car in 2012, so I kind of thought he checked it out.

15
Decoding/Numbers / Re: VIN verification
« on: July 12, 2017, 08:23:53 PM »
I'm trying figure out what an original Z with non original parts is actually worth.

Pages: [1] 2