CRG Discussion Forum

Camaro Research Group Discussion => Originality => Topic started by: BillOhio on August 13, 2012, 10:04:29 PM

Title: Picture of 69 z top of engine wanted
Post by: BillOhio on August 13, 2012, 10:04:29 PM
I am trying to see what the passenger side of the carb area looks like and have not found a good picture. would someone post an original car please? I am trying to make sure I have all the right clips and brackets.
Thanks
Title: Re: Picture of 69 z top of engine wanted
Post by: 1968RSZ28 on August 13, 2012, 11:04:26 PM
Here's a photo of JohnZ's car...

Paul
Title: Re: Picture of 69 z top of engine wanted
Post by: BillOhio on August 13, 2012, 11:10:51 PM
thats what I was looking for but dont see the vacuum advance clip or the pcv bracket that goes on the carb bolt. anyone got any others?
Thanks
Title: Re: Picture of 69 z top of engine wanted
Post by: 1968RSZ28 on August 13, 2012, 11:19:44 PM
As for the PVC bracket at the carburetor, check out m22mike's photo and JohnZ's reply (#2) in this CRG thread... http://www.camaros.org/forum/index.php?topic=3341.0

Paul
Title: Re: Picture of 69 z top of engine wanted
Post by: 1968RSZ28 on August 13, 2012, 11:28:10 PM
As for the vacuum advance steel line, clip and rubber hose see JohnZ's reply (#2) and photo in this CRG thread...  http://www.camaros.org/forum/index.php?topic=9379.0

Paul
Title: Re: Picture of 69 z top of engine wanted
Post by: BillOhio on August 13, 2012, 11:40:34 PM
Maybe I am not missing any parts!  that would be good.
Thanks Paul
Title: Re: Picture of 69 z top of engine wanted
Post by: BULLITT65 on August 14, 2012, 10:22:33 PM
Hey Bill I was trying to find out if all 69 camaros came with the metal line and clip, but my thread got hijacked, so I never got a clear answer. I have a 08C car but it did not have the clip. A bracket I notice that is missing from John Z pictures provided is the fuel line clip, I don't have a great picture of it but you can see most of it here:
Title: Re: Picture of 69 z top of engine wanted
Post by: BULLITT65 on August 14, 2012, 10:24:44 PM
sorry, my picture must be to large, can't post it yet, someone out there might have a better picture of it than I do
Title: Re: Picture of 69 z top of engine wanted
Post by: BillOhio on August 15, 2012, 02:45:10 AM
Mine has tube and hose and pretty sure its the original hose. No clip. I did buy a used one and wondered why it has orange paint on it
Title: Re: Picture of 69 z top of engine wanted
Post by: BULLITT65 on August 15, 2012, 02:52:23 AM
ok here is the picture of the fuel line clip
Title: Re: Picture of 69 z top of engine wanted
Post by: JohnZ on August 15, 2012, 03:23:03 PM
Hey Bill I was trying to find out if all 69 camaros came with the metal line and clip, but my thread got hijacked, so I never got a clear answer. I have a 08C car but it did not have the clip. A bracket I notice that is missing from John Z pictures provided is the fuel line clip, I don't have a great picture of it but you can see most of it here:

The added fuel line clip/bracket didn't start until around July/August 1969.
Title: Re: Picture of 69 z top of engine wanted
Post by: Dusk Blue Z on February 10, 2014, 01:06:16 PM
The AIM shows items 12 & 13 added 10-31-68. Would that be the time frame parts made it into the production line?

Mike

Title: Re: Picture of 69 z top of engine wanted
Post by: bertfam on February 10, 2014, 02:39:23 PM
Quote
The AIM shows items 12 & 13 added 10-31-68. Would that be the time frame parts made it into the production line?

No, that's only the date the engineering change was recorded in the AIM. The actual change could have been up to several months before or after that date.

Ed
Title: Re: Picture of 69 z top of engine wanted
Post by: william on February 10, 2014, 03:01:21 PM
I've seen one on an 06A car.
Title: Re: Picture of 69 z top of engine wanted
Post by: 69Z28 on February 10, 2014, 04:15:19 PM
Yeah 06A, but when since 06A seems to cover the whole month. My 06A is pretty close to the end of May, probably the first week of June...should it have one?
Title: Re: Picture of 69 z top of engine wanted
Post by: william on February 10, 2014, 06:21:37 PM
The car was a very late 06A based on VIN. I saw it over 10 years ago and will check if I still have notes on it. I did take a photo of the carb w/lines & bracket attached. I'm guessing an early 06A would not have the bracket based on what is known.

It was in a farm field untouched for 26 years-probably still there. Just about anything of value had been removed and was piled in a shed.
Title: Re: Picture of 69 z top of engine wanted
Post by: 69Z28 on February 11, 2014, 06:23:30 PM
The car was a very late 06A based on VIN. I saw it over 10 years ago and will check if I still have notes on it. I did take a photo of the carb w/lines & bracket attached. I'm guessing an early 06A would not have the bracket based on what is known.

It was in a farm field untouched for 26 years-probably still there. Just about anything of value had been removed and was piled in a shed.

Thanks William. At least I know I wouldn't have to hunt one of those pieces down now.
Title: Re: Picture of 69 z top of engine wanted
Post by: rszmjt on February 13, 2014, 11:00:39 PM
I've seen one on an 06A car.

My 06A has the fuel line clip, build date is June 18? and the shipping date is June 22 or 23?, if I remember correctly. Canadian Docs Z28. It says "Stamp Rite" on it, its black, not phospahate, never been off the fuel line.
No PCV clip, in fact NEVER seen one on a Z, just L78 as posted.
Title: Re: Picture of 69 z top of engine wanted
Post by: BULLITT65 on February 14, 2014, 01:58:07 AM
Good info, so does anyone have an earlier car with the clip?
Title: Re: Picture of 69 z top of engine wanted
Post by: sbmiano on April 09, 2014, 04:37:06 PM
Looking at the pix of the engine above, where is the engine hook?? The spark plug wire arm is on the last bolt on the manifold, my understanding that it is on the 2 to last and the engine hook is on the last with a shouldered bolt???  Maybe I cant see it
Title: Re: Picture of 69 z top of engine wanted
Post by: 69Z28-RS on April 09, 2014, 06:26:24 PM
I've seen one on an 06A car.

My 06A has the fuel line clip, build date is June 18? and the shipping date is June 22 or 23?, if I remember correctly. Canadian Docs Z28. It says "Stamp Rite" on it, its black, not phospahate, never been off the fuel line.
No PCV clip, in fact NEVER seen one on a Z, just L78 as posted.

My 09C Z28-RS had one on it (see photo) when I purchased it in 1976.. First one I'd ever seen, and ONLY one I'd ever seen for many years after I'd purchased the car... (now they reproduce them)...  that makes me think they were only used on very late '69 cars, and perhaps only sporadically??

Gary
69Z28-RS
Title: Re: Picture of 69 z top of engine wanted
Post by: VINCE Z28 on April 10, 2014, 03:30:37 AM
See John Z reply #10 on fuel line clip.
Title: Re: Picture of 69 z top of engine wanted
Post by: 6667ss138 on April 10, 2014, 04:28:59 AM
My 07A car still has the clip on the fuel line.
Title: Re: Picture of 69 z top of engine wanted
Post by: BULLITT65 on April 10, 2014, 04:31:15 AM
so we know from 6A on they were installed. any may cars with them?
Title: Re: Picture of 69 z top of engine wanted
Post by: VINCE Z28 on April 10, 2014, 12:51:05 PM
According to John Z...  " The added fuel line clip/bracket didn't start until around July/August 1969".  Reply post #10.
Title: Re: Picture of 69 z top of engine wanted
Post by: BULLITT65 on April 10, 2014, 02:10:10 PM
Yes i read that, but 2 guys have posted (reply 15 & 17) saying they have seen them on 6A cars. So when John says around july or august of 69, I see someone say june and that is around july. We will have to see if more guys post about having it on there 06A cars and what the vin is.
Title: Re: Picture of 69 z top of engine wanted
Post by: sixt9x33rs on April 12, 2014, 01:00:47 PM
Hey Bill I was trying to find out if all 69 camaros came with the metal line and clip, but my thread got hijacked, so I never got a clear answer. I have a 08C car but it did not have the clip. A bracket I notice that is missing from John Z pictures provided is the fuel line clip, I don't have a great picture of it but you can see most of it here:

John my Silver original paint car that is basically untouched had the fuel line clip in a box of parts that came with the car. It is a 05C car. The part was very old surface rust etc. I am pretty sure that part would had been with the car when new.

The added fuel line clip/bracket didn't start until around July/August 1969.
Title: Re: Picture of 69 z top of engine wanted
Post by: zman1969 on April 23, 2014, 06:04:31 PM
Yes i read that, but 2 guys have posted (reply 15 & 17) saying they have seen them on 6A cars. So when John says around july or august of 69, I see someone say june and that is around july. We will have to see if more guys post about having it on there 06A cars and what the vin is.
Bullitt, I've recently seen a statement that all June built cars were 6A so it may be late June built cars got this?