CRG Discussion Forum

Camaro Research Group Discussion => Mild Modifications => Topic started by: 10-3-68 on April 03, 2012, 08:21:23 PM

Title: 10 Bolt Posi
Post by: 10-3-68 on April 03, 2012, 08:21:23 PM
I'm in need axle bearing snap rings for my 10bolt posi rear end. I cant find anyplace locally that has them. please help :'(
Title: Re: 10 Bolt Posi
Post by: 1968RSZ28 on April 03, 2012, 09:02:02 PM
I'm in need axle bearing snap rings for my 10bolt posi rear end. I cant find anyplace locally that has them. please help :'(

Snap rings?  Do you mean the rear axle C-clips?

http://www.heartbeatcitycamaro.com/store/product/16893/Camaro-Rear-axle-C-clip-each-67-68-69/

Paul
Title: Re: 10 Bolt Posi
Post by: 10-3-68 on April 03, 2012, 09:15:24 PM
first off thanks for reading my post.


so, i'm not talking about the C clips that are located in the diff. I'm needing the snapring, snap retainer or whatever the heck is called that is located behind the axle shaft seal in front of the axle bearings which are located at the "end" of the housings. I removed the snap thingys and set them down and then when cleaning up they got put in the trash which was picked up this morning.

Thanks in advance for all advice, insight, and help.
Title: Re: 10 Bolt Posi
Post by: zman1969 on April 10, 2013, 03:30:50 PM
On a Chevy axle there is no snap ring retainer, the bearings go in the end of the axle tube with a press interference fit they are followed by the seal also a interference fit
Title: Re: 10 Bolt Posi
Post by: 67 RS Ragtop on April 10, 2013, 04:20:34 PM
I believe you may have removed the retainer in the bearing itself, as stated earlier, there are no snap rings to hold the bearing into the housing. JMO