CRG Discussion Forum
Camaro Research Group Discussion => Restoration => Topic started by: LM69Z28 on May 09, 2011, 06:44:17 PM
-
Which are the correct hood blanket clips for 69 Z/28. The all solid ones or the ones with 4 small round holes?
Thanks LM69Z28
-
round ones with the holes...
-
Thanks, any partiacular installation? Are the holes postiioned at 3 6 9 and 12 O'clock or 2 4 8 and 10?
LM69Z28
-
The holes are already in the hood. 13 around the outside edges and 4 somewhat in the middle.
-
My response was misunderstood. The plastic retaining clips have 4 small round holes. How are the clips postioned so at what quadrants are the holes in the clips located at.
Imagine looking at the face of a clock to position the holes in the clips onto the blanket
Thanks
LM69Z28
-
Check this link at Alan Colvin's web site. They are at 12, 3, 6 and 9 in this picture but who knows how they ended up when installed.
http://alancolvin.com/store/457-2/
http://alancolvin.com/wp-content/uploads/2010/09/clips.jpg
-
I believe the clips were applied randomly! You can find plenty of these in junkyards on 69 passenger cars, and just clean them up.
-
They are the rounds ones with the 4 small holes in them.
-
Following up with Alan Colvin...............Thanks much to all who have responded! LM69Z28
-
I bought some of Alan Colvins clips when he first came out with them and they are the best ones out there .
-
LM69Z28 PM sent.
-
I don't think blue collars did pay much attention when they slammed the clips in place!
Here is the result of my own mounting:
(http://i64.photobucket.com/albums/h193/hugger69/December002.jpg)
...you have to push really hard to get them fixed in place, beware of cracked thumbs! ;)
-
I believe the clips were applied randomly!
That's correct - they just whacked them in with a rubber mallet; no attempt was made to orient them.