CRG Discussion Forum
Camaro Research Group Discussion => General Discussion => Topic started by: LILT on March 10, 2011, 02:51:21 AM
-
In 69 were camaros made with 10 bolt posi rears. I am look to buy a 69 the owner said the rear is a 3:08 posi 10 bolt.Also can power brakes be added
-
Yes and yes.
-
In 69 were camaros made with 10 bolt posi rears.
Yes, posi was an option on any axle.
Also can power brakes be added
Yes again. Check out UPC J50 in the AIM for what's required.
Ed
-
I would beware..10-bolt positive-traction rear axles were rare unless the car is an SS, especially with 3.08s. '69s had the 8.2" ring gear and the car may have a later-model 10-bolt swapped in. The later 10-bolt is a good thing unless you want originality. To add power brakes all you have to do is put a booster behind the master cylinder. My 2 cents and hope this helps.
-
I would beware..10-bolt positive-traction rear axles were rare unless the car is an SS, especially with 3.08s. '69s had the 8.2" ring gear and the car may have a later-model 10-bolt swapped in. The later 10-bolt is a good thing unless you want originality. To add power brakes all you have to do is put a booster behind the master cylinder. My 2 cents and hope this helps.
Not so true in my searches...I have seen several 10 bolt 3.08 posi...as a matter of fact getting ready to by a convertible with one...jmo.