CRG Discussion Forum

Camaro Research Group Discussion => Restoration => Topic started by: BowtieSweden on January 30, 2011, 07:38:27 PM

Title: 69 firewall template?
Post by: BowtieSweden on January 30, 2011, 07:38:27 PM

Hi there, 

It was a long time since I last posted a topic here, but....

I have my long-term project that I'm trying to find time for, among other projects.
Is there a template that describes the holes in the firewall, the side toward the enginecompartment?

The car is a -69 Camaro SS350 Conv, that I'm putting in a L-72 427.
Is there information somewhere, it's here.

//GUS

Title: Re: 69 firewall template?
Post by: firstgenaddict on January 30, 2011, 07:57:09 PM

The front of the AIM has most if not all of the piercings along with the RPO codes for each, if not in the front they would be located with the RPO Sheets through out the manual.

 

Title: Re: 69 firewall template?
Post by: BowtieSweden on January 30, 2011, 09:01:14 PM

Sorry if I be unclear,
but I mean such holes drilled, not the holes for the heater and stuff.

There are always extra holes drilled or cut-outs after all these years.
I want to have it like it should be.

//GUS

Title: Re: 69 firewall template?
Post by: KurtS on January 31, 2011, 04:11:22 AM

http://www.camaros.org/options.shtml#id shows some.
But the AIM shows all the holes and lists the options that go with the holes.

Title: Re: 69 firewall template?
Post by: JohnZ on January 31, 2011, 04:13:26 PM

UPC 0, sheet A9 summarizes most of the drilled holes for option conditions that are also shown on the sheets in the option sections.

Title: Re: 69 firewall template?
Post by: BowtieSweden on January 31, 2011, 04:39:36 PM

Thanks guys.

//GUS