CRG Discussion Forum
Camaro Research Group Discussion => Maintenance => Topic started by: 69z28302 on November 07, 2010, 02:09:25 PM
-
1969 Rear Wheel Cylinder Plungers?. The little metal T shaped rods that push the shoes out.
Does anyone know where to get these?
Thanks CRG
-
The vendors have them but I would just call my local parts store and have them delivered. Or go there if you're a non account.
-
I figured any parts house would have them. Autozone didnt. O'reilys doesn't show them on line. I'll get diggin though.
-
NAPA
-
Are you talking about the pin retainers that hold the shoes to the backing plate? If so I have a box full.
-
Are you talking about the pin retainers that hold the shoes to the backing plate? If so I have a box full.
Nope
-
No , the rods that fit into the wheel cylinder and pushs the shoes out. Kinda T shaped.
Thanks
Mike
-
Just about all the repop houses carry them. Not sure where you are, but here they are from RICK'S (http://www.rickscamaros.com/camaro-drum-brake-wheel-cylinder-push-link-1967-1969.html)
Ed
-
Just about all the repop houses carry them. Not sure where you are, but here they are from RICK'S (http://www.rickscamaros.com/camaro-drum-brake-wheel-cylinder-push-link-1967-1969.html)
Ed
Thanks Ed
-
No problem. You can probably find them at your local FLAPS (Friendly Local Auto Parts Store) as well. They were used on just about every 60's - 80's GM car and truck ever made! If it had front and/or rear drum brakes, they were used...
HERE'S (http://cgi.ebay.com/ebaymotors/Brake-Shoe-Link-GM-Chevy-Olds-9-1-2-Inch-Brake-Shoe-_W0QQcmdZViewItemQQhashZitem35960beb83QQitemZ230150630275QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories) a good price on ebay. Looks like a set of two plus shipping?
Ed