CRG Discussion Forum

Camaro Research Group Discussion => Originality => Topic started by: 69z28302 on July 09, 2010, 12:18:11 AM

Title: 69 z28 carb Nuts and washers
Post by: 69z28302 on July 09, 2010, 12:18:11 AM

Was wondering how the carbs came from the factory. Studs Nuts & flat washers, or lock washers, or no washers. Any help will be appreciated.
Mike

Title: Re: 69 z28 carb Nuts and washers
Post by: big iron on July 09, 2010, 01:25:18 AM

Mike,
69 AIM UPC Z28 A3 shows only production nuts being used.
Others on the site could verify that being correct.
Bob

Title: Re: 69 z28 carb Nuts and washers
Post by: JohnZ on July 09, 2010, 02:44:08 PM

No flat washers or lock washers - just the nuts; I use thin flat washers to spread the load, but the factory didn't.

Title: Re: 69 z28 carb Nuts and washers
Post by: 69z28302 on July 10, 2010, 03:15:20 PM

Thanks guys. I thought there weren't any washers. I think I'll a least put some flats on it.