CRG Discussion Forum

Camaro Research Group Discussion => Restoration => Topic started by: big iron on April 29, 2010, 01:35:09 AM

Title: 67 AIM 6 B2
Post by: big iron on April 29, 2010, 01:35:09 AM

Anyone have a 67 AIM with UPC 6 B2? The one I have is blank.
Bob

Title: Re: 67 AIM 6 B2
Post by: big iron on April 29, 2010, 03:05:07 AM

Found what I needed in 67 Corvette AIM.
Bob

Title: Re: 67 AIM 6 B2
Post by: ibfootin on June 01, 2010, 05:14:56 PM

What is an AIM

Title: Re: 67 AIM 6 B2
Post by: Steve68 on June 01, 2010, 05:28:52 PM

Assembly Instruction Manual (AIM).  aka: Factory Assembly Manual or Factory Assembly Instructions Manual.

Title: Re: 67 AIM 6 B2
Post by: tom on June 01, 2010, 05:37:27 PM

Assembly Instruction Manual

Title: Re: 67 AIM 6 B2
Post by: 1968RSZ28 on June 01, 2010, 06:02:59 PM

Quote from: ibfootin on June 01, 2010, 05:14:56 PM

What is an AIM

See attached photo...

Paul

Title: Re: 67 AIM 6 B2
Post by: daytho1 on June 15, 2010, 11:02:41 AM

Wish I had a copy of that page.  Mine is blank also.

Title: Re: 67 AIM 6 B2
Post by: MyRed67 on July 20, 2010, 03:49:42 AM

  Mines blank too.  What's supposed to be on that page?

Title: Re: 67 AIM 6 B2
Post by: MyRed67 on July 20, 2010, 03:59:31 AM

  Duh, Senior moment there.  I got to thinking that I've seen several blank pages in the 67 AIM, I have.  Don't necessarily mean that anything is missing.

Title: Re: 67 AIM 6 B2
Post by: big iron on July 20, 2010, 01:06:51 PM

I was looking for information on the 67 oil canister and associated parts. If you use the Corvette 67 AIM it has the information. I just made a copy of the page and put it in my Camaro 67 AIM.

JohnZ,
On 6 B1 of the 67 Corvette AIM it shows the starter sealed to the engine splash shield. Did this happen and did it work?
Bob

Quote from: MyRed67 on July 20, 2010, 03:49:42 AM

  Mines blank too.  What's supposed to be on that page?

Title: Re: 67 AIM 6 B2
Post by: JohnZ on July 20, 2010, 02:30:57 PM

Quote from: big iron on July 20, 2010, 01:06:51 PM

  JohnZ,
On 6 B1 of the 67 Corvette AIM it shows the starter sealed to the engine splash shield. Did this happen and did it work?
Bob

Yes - that area was sealed with "dum-dum" (same as 3M "Strip-Calk") as noted on the sheet; probably didn't last more than a year or two before it came off.

Title: Re: 67 AIM 6 B2
Post by: big iron on July 21, 2010, 12:38:23 AM

Thanks JohnZ, I just had to ask.
Bob