CRG Discussion Forum
Camaro Research Group Discussion => General Discussion => Topic started by: stovebolt on February 14, 2010, 02:21:27 PM
-
Hi. Can anyone tell me the GM part number for the air manifold assembly (smog system air injector pipe) used on my 1968 6 cylinder engine? Thanks.
-
Hi. Can anyone tell me the GM part number for the air manifold assembly (smog system air injector pipe) used on my 1968 6 cylinder engine? Thanks.
The '68 AIM list part number 3918952 (pipe assembly).
Paul
-
Thank you.
-
Just to be certain of the part number, I'm including a picture of the part from the Service Manual. Sight unseen, I don't want to order the wrong part. Can anyone verify that 3918952 is indeed the correct part number? Thanks.
-
Just to be certain of the part number, I'm including a picture of the part from the Service Manual. Sight unseen, I don't want to order the wrong part. Can anyone verify that 3918952 is indeed the correct part number? Thanks.
My '69 Chevrolet P&A shows...
68-69 Chevy, Chevelle, Camaro (6 cyl.) (exc. A.T.) . . . . . 3918952 $6.60 PIPE ASSY., w/ conn., check valve . . . . . 1
Your welcome.
Paul
-
And in case you need the check valve & injection tubes shown in your photo, the P&A lists these part numbers...
Check Valve . . . . . . . . . 5361992
Injection Tube . . . . . . . 3880812
Paul
-
Just to be certain of the part number, I'm including a picture of the part from the Service Manual. Sight unseen, I don't want to order the wrong part. Can anyone verify that 3918952 is indeed the correct part number? Thanks.
I don't know where you'd order it - that part was discontinued about 30 years ago.
-
Thanks for all your help. I just received in the mail the last GM inventoried 3918952 air manifold assembly from a Chevrolet dealer in Arizona.
-
Well done !
-
Can you post a picture of the NOS item. I'm reasonably certain that the colour is original on mine but would like to be 100%. I'm assuming that the finish between a 67 and a 68 will be the same.
Thanks
-
Here you are. BTW, am I correct in assuming that the pipe was made on December 3, 1975, 75L3?
Joe