CRG Discussion Forum
Camaro Research Group Discussion => Mild Modifications => Topic started by: CamaroMe on January 18, 2009, 11:41:31 PM
-
Has anyone successfully converted a Powerglide to a 700R4 in a 67? I believe I've got everything necessary including the crossmember from Bowtie Overdrives except for the driveshaft. Did you purchase a new driveshaft or shorten the stock one? Any recommendations out there? Any other tips or secets?
-
I put one in my 68rs and had my drive shaft shortened, also you may want to look at Steves custom camaro web site, he has a conversion that allows you to use the stock horse shoe shifter and it comes with an upgraded shifter position window, Scott
-
Shifter window is or at least was available through many Camaro parts venders. If you have any plans to ever return to stock, you might want to replace the shaft.
-
I have done this with my 68 as well. You will have to change the detent plate on your shifter with an aftermarket piece. I also used a vacuum switch off the carburetor to control converter lockup. Excellent driveability with this setup. Try 700R4.com
-
Yes, I used Bowtie Overdrives in my '68 and everything worked fine. After I installed it I measured everything and had Denny's Driveshafts (http://www.dennysdriveshaft.com) make me a new one. It bolted right on. No other issues and a great upgrade.