CRG Discussion Forum

Camaro Research Group Discussion => Maintenance => Topic started by: Camaroon on October 25, 2008, 11:00:37 PM

Title: Gear oil capacity of Muncie M20/M21/M22...
Post by: Camaroon on October 25, 2008, 11:00:37 PM

Hey guys....

Anyone know how much 80/90 gear oil to properly fill a drained Muncie transmission?

Thanks dudes! 

 ;D

Camaros Rock !

Yee Ha...!!!
Title: Re: Gear oil capacity of Muncie M20/M21/M22...
Post by: gro51 on October 25, 2008, 11:46:45 PM
According to my Chiltons,  3 pints.
Title: Re: Gear oil capacity of Muncie M20/M21/M22...
Post by: JohnZ on October 26, 2008, 01:57:11 PM
Fill it to the bottom of the fill hole and install the plug.
Title: Re: Gear oil capacity of Muncie M20/M21/M22...
Post by: glenn64vette on October 29, 2008, 10:34:42 PM
Fill it to the bottom of the fill hole and install the plug.

Just make sure the trans is level.

Sorry John I just had to add that, seen too many over and under filled Munices because they were not level on fill.
Title: Re: Gear oil capacity of Muncie M20/M21/M22...
Post by: Camaroon on October 29, 2008, 11:53:54 PM
Hey guys, thank you for the info.

I am curious though. How close to 3 pints is used when filling the Muncie using the "fill 'till it runs out of the hole while trans is level" method?


thanks for help on this..

 
Title: Re: Gear oil capacity of Muncie M20/M21/M22...
Post by: JohnZ on October 30, 2008, 08:05:39 PM
Hey guys, thank you for the info.

I am curious though. How close to 3 pints is used when filling the Muncie using the "fill 'till it runs out of the hole while trans is level" method?

About 2-1/2 pints.