CRG Discussion Forum

Camaro Research Group Discussion => Restoration => Topic started by: chevyman555 on October 13, 2008, 01:55:54 AM

Title: 67 Z 28 Winshield Cowel Scews
Post by: chevyman555 on October 13, 2008, 01:55:54 AM

I am restoring a 67 Z and I note that all the screws I see in the books (and pics) that fasten the cowel panel are small.  The holes that these screw go in are too big for these small screws.  The holes do not appear to have been drilled out to a larger size.  Were there some 67s that used  a larger fastner?  Thanks to all.  This forum has been a tremendous help - close to done.

Title: Re: 67 Z 28 Winshield Cowel Scews
Post by: Jerry@CHP on October 14, 2008, 03:11:13 AM

All of the cowl screws were the same.  1/4" indented head sheet metal screws plated in silver cad.  Someone had to do something on the holes.  Most cars that you see at car shows do not have the correct screws,

Jerry

Title: Re: 67 Z 28 Winshield Cowel Scews
Post by: chevyman555 on October 25, 2008, 12:36:21 AM

Thanks Jerry.

Title: Re: 67 Z 28 Winshield Cowel Scews
Post by: Charley on October 25, 2008, 03:04:19 AM

cad screw on my 67 Z28(http://www.yenko.net/attachments/361734-tn_004.JPG)