CRG Discussion Forum

Camaro Research Group Discussion => Originality => Topic started by: incom5633 on June 18, 2008, 07:32:35 PM

Title: 1969 350 TEMP. SENDING CONNECTOR
Post by: incom5633 on June 18, 2008, 07:32:35 PM
good afternoon- would someone please clarify which style temp. sending unit came factory on a 69 350ss camaro ( build date 02/69) with gauges. also which style of connector is correct. pictures if possible. thanks
Title: Re: 1969 350 TEMP. SENDING CONNECTOR
Post by: RamAirDave on June 19, 2008, 12:53:40 AM
With gauges, it is the unit with the threaded post.  The wire has an eye connector that is attached with a nut.
Title: Re: 1969 350 TEMP. SENDING CONNECTOR
Post by: gro51 on June 19, 2008, 01:22:59 AM
Dave - would a '68 ss 350 be the same?  (no gauges)
Title: Re: 1969 350 TEMP. SENDING CONNECTOR
Post by: JohnZ on June 19, 2008, 02:50:24 PM
Dave - would a '68 ss 350 be the same?  (no gauges)

Nope. 68's without gauges used a push-on blade connector on the switch/sending unit for the temperature light.
Title: Re: 1969 350 TEMP. SENDING CONNECTOR
Post by: incom5633 on June 19, 2008, 04:04:03 PM
thanks a lot gentlemen