CRG Discussion Forum

Camaro Research Group Discussion => Mild Modifications => Topic started by: chd3 on April 06, 2008, 06:20:24 PM

Title: Multi-leaf to mono-leaf axle housing installation
Post by: chd3 on April 06, 2008, 06:20:24 PM
I am installing a 12 bolt with multi leaf mounting perches on mono leaf springs. Does anyone know if spacers and pads are made for this conversion. I do not want to cut and replace the perches on the axle housing? Thanks.
Title: Re: Multi-leaf to mono-leaf axle housing installation
Post by: 1968RSZ28 on April 06, 2008, 06:48:49 PM
I am installing a 12 bolt with multi leaf mounting perches on mono leaf springs. Does anyone know if spacers and pads are made for this conversion. I do not want to cut and replace the perches on the axle housing? Thanks.

Why not just install a pair of multi-leaf springs?

http://store.heartbeatcity.net/store/product/16815/Leaf-springs%2C-4-leaf%2C-correct/

Paul
Title: Re: Multi-leaf to mono-leaf axle housing installation
Post by: bertfam on April 06, 2008, 07:23:47 PM
Quote
Does anyone know if spacers and pads are made for this conversion

Not that I know of. Since the multi leaf spring perch is much deeper than the mono leaf perch, you're going to have to make some kind of spacers to take up the slack. I don't recommend wooden blocks, but something like aluminum might work. Steel would be better, but cutting this would be more difficult than aluminum.

Ed
Title: Re: Multi-leaf to mono-leaf axle housing installation
Post by: dd442 on April 07, 2008, 02:13:18 PM
I have used a cut block of aluminum and also used composite fiber blocks that work well.