CRG Discussion Forum

Camaro Research Group Discussion => Decoding/Numbers => Topic started by: '68vert on September 04, 2007, 07:23:47 PM

Title: Partial VIN on Tranny
Post by: '68vert on September 04, 2007, 07:23:47 PM
My '68 vert does not have the original motor & I have always suspected that the tranny is not original either, so, this past weekend I crawled underneath to get the VIN off of it.
It is: 19K565620
I'm thinking that the 'K' is for the Kansas City assembly plant and this trans came from a '69 Chevelle.
Would that be correct??

Thanks
Jerry
Title: Re: Partial VIN on Tranny
Post by: 1968RSZ28 on September 04, 2007, 08:10:37 PM
My '68 vert does not have the original motor & I have always suspected that the tranny is not original either, so, this past weekend I crawled underneath to get the VIN off of it.
It is: 19K565620
I'm thinking that the 'K' is for the Kansas City assembly plant and this trans came from a '69 Chevelle.
Would that be correct??

Jerry -

You're correct on the assembly plant being Kansas City, MO.  The transmission is out of a Chevelle or an El Camino.    :)

Paul
Title: Re: Partial VIN on Tranny
Post by: tar6569 on September 05, 2007, 12:35:31 AM
Hi, what is the stamp date stamped into the side of your main case?
Title: Re: Partial VIN on Tranny
Post by: '68vert on September 05, 2007, 01:40:30 PM
Thank you for confirming.

Here is the stamping code: S9D26

Jerry
Title: Re: Partial VIN on Tranny
Post by: 1968RSZ28 on September 05, 2007, 04:59:21 PM
Here is the stamping code: S9D26

S = Saginaw 3-speed
9 = 1969
D = April
26 = day of month

So, your Saginaw 3-speed manual transmission was assembled on April 26, 1969.

Paul