CRG Discussion Forum
Camaro Research Group Discussion => Restoration => Topic started by: 427 on August 03, 2007, 09:38:43 PM
-
I need to purchase an intake manifold for a 1969 427 oval port. Having trouble finding one. Anyone have an idea where should I search for an original or should I just go with aftermarket, and if so, any advice on what to go with?
Thanks.
-
There are these on ebay
http://cgi.ebay.com/ebaymotors/chevy-396-402-454-LS5-intake-70-chevelle-corvette-nova_W0QQitemZ260144273788QQihZ016QQcategoryZ34202QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
http://cgi.ebay.com/ebaymotors/Original-1969-1970-1971-396-chevy-Intake-and-carb_W0QQitemZ200135488454QQihZ010QQcategoryZ34198QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
http://cgi.ebay.com/ebaymotors/1966-CHEVELLE-IMPALA-BISCAYNE-MALIBU-396-427-INTAKE-BBC_W0QQitemZ180143759340QQihZ008QQcategoryZ36474QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
http://cgi.ebay.com/ebaymotors/Original-BBC-oval-port-396-four-bbl-intake-manifold_W0QQitemZ260144573325QQihZ016QQcategoryZ36474QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
http://cgi.ebay.com/ebaymotors/66-67-chevelle-corvette-Holley-cast-intake-396-427-RARE_W0QQitemZ300136469038QQihZ020QQcategoryZ34198QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
http://cgi.ebay.com/ebaymotors/1968-chevelle-396-intake_W0QQitemZ120146834854QQihZ002QQcategoryZ34202QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
http://cgi.ebay.com/ebaymotors/396-427-intake-chevelle-impala-biscayne-BB-chevrolet_W0QQitemZ300136492037QQihZ020QQcategoryZ34198QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
http://cgi.ebay.com/ebaymotors/70-71-Corvette-Chevelle-Camaro-396-454-Intake-Manifold_W0QQitemZ200135788971QQihZ010QQcategoryZ34198QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
http://cgi.ebay.com/ebaymotors/Stock-chevy-396-4-barrell-holly-GM-intake-manifold_W0QQitemZ320143713100QQihZ011QQcategoryZ36474QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
Not sure what numbers or date codes you are looking for, but keep checking. I did a search for 396 intake.
-
I took a look at my books and since the oval port 427 was not avail on 69 camaros, the closest one is the 396/325-350 hp manifold which also came on passenger car 427/390s. it is 3931067.
the closest looking intake is this one
http://cgi.ebay.com/ebaymotors/1968-chevelle-396-intake_W0QQitemZ120146834854QQihZ002QQcategoryZ34202QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
you could email seller for the casting number.
-
Kevin, thanks for your help.
-
I need to purchase an intake manifold for a 1969 427 oval port. Having trouble finding one. Anyone have an idea where should I search for an original or should I just go with aftermarket, and if so, any advice on what to go with?
Thanks.
Are you looking for cast iron or aluminum? Does dating matter?