CRG Discussion Forum
Camaro Research Group Discussion => General Discussion => Topic started by: Flowjoe on June 19, 2007, 07:47:45 PM
-
Below is a radio with the service model number 91APB1 which I make out to be a 1969 Chevolet Push button radio for Tempest, Chevelle, Camaro, ChevyII, Acadian..it has a green face plate...I have two questions
1) did I get the application correct?
2) is the extra wiring and the "knob" wiring for a fader? Was this availabel in Camaro?
thanks in advance
(http://www.members.cox.net/flowjo68/images/radio.JPG)
-
Flowjoe,
1) did I get the application correct? I agree
2) is the extra wiring and the "knob" wiring for a fader? Yes Was this availabel in Camaro? Yes
I'm not up on the 69 radios, but post a picture of the front and someone will tell you if it really is a Camaro radio.
Ed
-
The application code and fader are correct for a '69 Camaro U63 AM radio; the fader control was added at the assembly plant when the U80 rear speaker option was specified - you'll see it all in the U80 section in the assembly manual.
-
Thanks guys.
Here is a photo of the front..I have it in my computer becasue it was damaged during shipping..so it is not a full frontal image
(http://www.members.cox.net/flowjo68/images/radio4.JPG)
Anyone know where I can get a replacement face plate? How about the bent shaft..trying to figure out if this one is worth bring back or whether it would be cheaper to get a different radio.
What is an AM radio with U80 worth?
-
The bent shaft can be bent back. USE CAUTION and go slow or it will break. The AM RADIO LENS (http://www.rickscamaros.com/cgi-local/SoftCart.exe/cgi-local/smpagegen.exe?U+scstore+mjck6808ff868386+-p+-c+scstore.cfg+RP-26) is available from Ricks.
Not sure how much it's worth, but you might check the ebay "completed" auctions.
Ed
-
This came from Ebay...$25 which is cheaper than others I have seen...but if it costs too much to repair the damage it might not be worth it, if you follow my logic.
I'll check Rick's site